Outgoing source IP

Restricting the outgoing source IP address of the IPv4 explicit web proxy

You can use the following command to restrict the source address of outgoing web proxy packets to a single IP address. The IP address that you specify must be the IP address of an interface that the explicit web proxy is enabled on. You might want to use this option if the explicit web proxy is enabled on an interface with multiple IP addresses.

For example, to restrict the outgoing packet source address to 172.20.120.100:

config web-proxy explicit

set outgoing-ip 172.20.120.100

end

Restricting the outgoing source IP address of the IPv6 explicit web proxy

You can use the following command to restrict the source address of outgoing web proxy packets to a single IPv6 address. The IP address that you specify must be the IPv6 address of an interface that the explicit web proxy is enabled on. You might want to use this option if the explicit web proxy is enabled on an interface with multiple IPv6 addresses.

For example, to restrict the outgoing packet source address to 2001:db8:0:2::50:

config web-proxy explicit

set outgoing-ipv6 2001:db8:0:2::50

end