SIP ALG diagnose commands

You can use the diagnose sys sip-proxy command to display diagnostic information for the SIP ALG. A number of options are available including:

Use the following command to list all active SIP calls being processed by the SIP ALG. You can also use the clear option to delete all active SIP calls being processed by the SIP ALG, the idle option to list idle SIP calls, and the invite option to list SIP invite transactions.

diagnose sys sip-proxy calls {clear | list | idle | invite}

Use the following commands to employ filters to display specific information about the SIP ALG and the session that it is processing. You can build up a filter by including a number of options such as source address, VoIP profile, policy, and so on.

diagnose sys sip-proxy filter <filter_options>

diagnose sys sip-proxy log-filter <filter_options>

Use the following command to display the active SIP rate limiting meters and their current settings.

diagnose sys sip-proxy meters list

Use the following command to display status information about the SIP sessions being processed by the SIP ALG. You can also clear all SIP ALG statistics.

diagnose sys sip-proxy stats {clear | list}