You can filter the console on 'FortiASIC' ('Accelerated' versus 'Not Accelerated') sessions.

Filter by Access Point (AP) identification number.

Filter by application name.

Filter by checksum value. Checksums are reference digits used to represent the correct datasum of a packet in order to detect errors.

Filter by cloud application name.

Note: This filter is only available in the Cloud Applications console.

Filter by the country from which the source accessed the server.

Filter by the interface type used by the destination user, e.g. wan1.

Filter by the IP address used by the destination.

Filter by the port used by the destination.

Note: This filter is only available in the All Sessions console,(viewing the now time display).

Filter by domain name.

Note: This filter is only available in the Web Sites console.

Filter by security event name.

Note: This filter is only available in the System Events console.

Filter by file name.

Note: This filter is only available in the FortiSandbox console.

Filter by type of login (eg. WEP) associated with the displayed authentication attempt.

Note: This filter is only available in the Failed Authentications console.

Filter by the NAT-translated source IP address.

Note: This filter is only available in the All Sessions console,(viewing the now time display).

Filter by the NAT-translated source interface.

Note: This filter is only available in the All Sessions console,(viewing the now time display).

Filter by the policy identification number.

Filter by the protocol used by the source, e.g. tcp or udp.

Note: This filter is only available in the All Sessions console,(viewing the now time display).

Filter by the result of whatever security action was taken by FortiOs in the selected session, eg. Accept (all).

Filter by the type of response taken to the security event. The types of possible actions are as follows:

• Allowed: No threat was detected and the connection was let through.
• Blocked: A threat was detected and the connection was not let through.
• Reset: A possible issue was detected and the connection was reset.
• Traffic Shape: Some data packets may have been delayed to improve system-wide performance.

Filter by the severity level (Critical, High, Medium or Low) associated with a security event.

Filter by the source IP address.

Filter by source device type, e.g. mobile.

Filer by the interface type used by the source user, e.g. wan1.

Filter by the source interface.

Note: This filter is only available in the All Sessions console,(viewing the now time display).

Filter by the Service Set Identifier (SSID) associated with the selected user. An SSID is a case sensitive, 32 character alphanumerical identifier that acts as a password attributed to a mobile device.

Filter by the maliciousness of a file. The types of possible status' are: Malicious, High, Medium, Low, Clean, Unknown, and Pending.

Note: This filter is only available in the FortiSandbox console.

Filter by threat name and/or URL

Filter by threat category, e.g. Illegal/Unethical or P2P.

Note: This filter is only available in the Failed Authentications console.

Filter by user name.