Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

QoS profiles

You can create, edit, and import QoS profiles, or view where a profile is used.

note icon

QoS profiles are not available in version 5.4 ADOMs.

To view Quality of Service (QoS) profiles:
  1. Ensure you are in the correct ADOM.
  2. Go to AP Manager.
  3. In the tree menu, go to WiFi Profiles > QoS Profile (or from the tabs in version 5.6 ADOMs). The QoS Profile pane opens.

    The following options are available in the toolbar and right-click menu:

    Create New

    Create a new QoS profile.

    Edit

    Edit the selected QoS profile.

    Delete

    Delete the selected QoS profile.

    Clone

    Clone the selected QoS profile.

    Where Used

    View where the selected QoS profile is used.

    Import

    Import QoS profiles from a connected FortiGate (toolbar only).

To create a new QoS profile:
  1. Ensure you are in the correct ADOM,
  2. Go to AP Manager.
  3. In the tree menu, click WiFi Profiles > QoS Profile (or from the tabs in version 5.6 ADOMs). The QoS Profile pane opens.
  4. In the toolbar, click Create New. The Create New QoS Profile window opens.

  5. Enter the following information:

    Name

    Enter a name for the profile.

    Comments

    Optionally, enter comments.

    Max Uplink Speed (VAPs) The maximum uplink speed (VAPs), in Kbps (0 - 2097152, default = 0).
    Max Downlink Speed (VAPs) The maximum downlink speed (VAPs), in Kbps (0 - 2097152, default = 0).
    Max Uplink Speed (Clients) The maximum uplink speed (Clients), in Kbps (0 - 2097152, default = 0).
    Max Downlink Speed (Clients) The maximum downlink speed (Clients), in Kbps (0 - 2097152, default = 0).
    Client Rate Burst Enable/disable client rate burst (default = disable).
    Wi-Fi MultiMedia Enable/disable WiFi Multimedia (WMM) control (default = enable).
    U-APSD Power Save Mode

    Enable/disable WMM Unscheduled Automatic Power Save Delivery (U-APSD) power save mode (default = enable).

    This option is only available if Wi-Fi MultiMedia is enabled.

    Call Admission Control

    Enable/disable WMM call admission control (default = disable).

    This option is only available if Wi-Fi MultiMedia is enabled.

     

    Call Capacity

    The maximum number of VoWLAN phones allowed (0 - 60, default = 10).

    This option is only available if Call Admission Control is enabled.

    Bandwidth Admission Control

    Enable/disable WMM bandwidth admission control (default = disable).

    This option is only available if Call Admission Control is enabled.

     

    Bandwidth Capacity

    The maximum bandwidth capacity allowed, in Kbps (1 - 600000, default = 2000).

    This option is only available if Bandwidth Admission Control is enabled.

    DSCP Mapping Enable/disable differentiated Services Code Point (DSCP) mapping (default = disable).

     

    Voice Access

    DSCP mapping for voice access category (default = 48, 56).

    This option is only available if DSCP Mapping is enabled.

     

    Video Access

    DSCP mapping for video access category (default = 32, 40).

    This option is only available if DSCP Mapping is enabled.

     

    Best Effort Access

    DSCP mapping for best effort access category (default = 0, 24).

    This option is only available if DSCP Mapping is enabled.

     

    Background Access

    DSCP mapping for background access category (default = 8, 16).

    This option is only available if DSCP Mapping is enabled.

  6. Click OK.
To edit a QoS profile:
  1. Go to AP Manager.
  2. In the tree menu, click WiFi Profiles > QoS Profile (or from the tabs in version 5.6 ADOMs). The QoS Profile pane opens.
  3. Select a profile and do one of the following:
    • Double-click the profile to open it.
    • In the toolbar, click Edit.
    • Right-click on the profile then select Edit from the menu.

    The Edit QoS Profile window opens.

  4. Edit the settings as required.
  5. Click OK.
To delete QoS profiles:
  1. Go to AP Manager.
  2. In the tree menu, click WiFi Profiles > QoS Profile (or from the tabs in version 5.6 ADOMs). The QoS Profile pane opens.
  3. Select the profile or profiles to be deleted.
  4. In the toolbar, click Delete, or right-click then select Delete.
  5. Click OK.
To clone a QoS profile:
  1. Go to AP Manager.
  2. In the tree menu, click WiFi Profiles > QoS Profile (or from the tabs in version 5.6 ADOMs). The QoS Profile pane opens.
  3. In the toolbar, click Clone, or right-click and select Clone. The Clone QoS Profile pane opens.
  4. Edit the name of the profile, then edit the remaining settings as required.
  5. Click OK.
To import a QoS profile:
  1. Go to AP Manager.
  2. In the tree menu, click WiFi Profiles > QoS Profile (or from the tabs in version 5.6 ADOMs). The QoS Profile pane opens.
  3. In the toolbar, click Import. The Import dialog box opens.
  4. From the FortiGate dropdown, select a device.
  5. Click the Profiles field, and select a profile from the list.
  6. Click OK.
  7. Click OK.

QoS profiles

You can create, edit, and import QoS profiles, or view where a profile is used.

note icon

QoS profiles are not available in version 5.4 ADOMs.

To view Quality of Service (QoS) profiles:
  1. Ensure you are in the correct ADOM.
  2. Go to AP Manager.
  3. In the tree menu, go to WiFi Profiles > QoS Profile (or from the tabs in version 5.6 ADOMs). The QoS Profile pane opens.

    The following options are available in the toolbar and right-click menu:

    Create New

    Create a new QoS profile.

    Edit

    Edit the selected QoS profile.

    Delete

    Delete the selected QoS profile.

    Clone

    Clone the selected QoS profile.

    Where Used

    View where the selected QoS profile is used.

    Import

    Import QoS profiles from a connected FortiGate (toolbar only).

To create a new QoS profile:
  1. Ensure you are in the correct ADOM,
  2. Go to AP Manager.
  3. In the tree menu, click WiFi Profiles > QoS Profile (or from the tabs in version 5.6 ADOMs). The QoS Profile pane opens.
  4. In the toolbar, click Create New. The Create New QoS Profile window opens.

  5. Enter the following information:

    Name

    Enter a name for the profile.

    Comments

    Optionally, enter comments.

    Max Uplink Speed (VAPs) The maximum uplink speed (VAPs), in Kbps (0 - 2097152, default = 0).
    Max Downlink Speed (VAPs) The maximum downlink speed (VAPs), in Kbps (0 - 2097152, default = 0).
    Max Uplink Speed (Clients) The maximum uplink speed (Clients), in Kbps (0 - 2097152, default = 0).
    Max Downlink Speed (Clients) The maximum downlink speed (Clients), in Kbps (0 - 2097152, default = 0).
    Client Rate Burst Enable/disable client rate burst (default = disable).
    Wi-Fi MultiMedia Enable/disable WiFi Multimedia (WMM) control (default = enable).
    U-APSD Power Save Mode

    Enable/disable WMM Unscheduled Automatic Power Save Delivery (U-APSD) power save mode (default = enable).

    This option is only available if Wi-Fi MultiMedia is enabled.

    Call Admission Control

    Enable/disable WMM call admission control (default = disable).

    This option is only available if Wi-Fi MultiMedia is enabled.

     

    Call Capacity

    The maximum number of VoWLAN phones allowed (0 - 60, default = 10).

    This option is only available if Call Admission Control is enabled.

    Bandwidth Admission Control

    Enable/disable WMM bandwidth admission control (default = disable).

    This option is only available if Call Admission Control is enabled.

     

    Bandwidth Capacity

    The maximum bandwidth capacity allowed, in Kbps (1 - 600000, default = 2000).

    This option is only available if Bandwidth Admission Control is enabled.

    DSCP Mapping Enable/disable differentiated Services Code Point (DSCP) mapping (default = disable).

     

    Voice Access

    DSCP mapping for voice access category (default = 48, 56).

    This option is only available if DSCP Mapping is enabled.

     

    Video Access

    DSCP mapping for video access category (default = 32, 40).

    This option is only available if DSCP Mapping is enabled.

     

    Best Effort Access

    DSCP mapping for best effort access category (default = 0, 24).

    This option is only available if DSCP Mapping is enabled.

     

    Background Access

    DSCP mapping for background access category (default = 8, 16).

    This option is only available if DSCP Mapping is enabled.

  6. Click OK.
To edit a QoS profile:
  1. Go to AP Manager.
  2. In the tree menu, click WiFi Profiles > QoS Profile (or from the tabs in version 5.6 ADOMs). The QoS Profile pane opens.
  3. Select a profile and do one of the following:
    • Double-click the profile to open it.
    • In the toolbar, click Edit.
    • Right-click on the profile then select Edit from the menu.

    The Edit QoS Profile window opens.

  4. Edit the settings as required.
  5. Click OK.
To delete QoS profiles:
  1. Go to AP Manager.
  2. In the tree menu, click WiFi Profiles > QoS Profile (or from the tabs in version 5.6 ADOMs). The QoS Profile pane opens.
  3. Select the profile or profiles to be deleted.
  4. In the toolbar, click Delete, or right-click then select Delete.
  5. Click OK.
To clone a QoS profile:
  1. Go to AP Manager.
  2. In the tree menu, click WiFi Profiles > QoS Profile (or from the tabs in version 5.6 ADOMs). The QoS Profile pane opens.
  3. In the toolbar, click Clone, or right-click and select Clone. The Clone QoS Profile pane opens.
  4. Edit the name of the profile, then edit the remaining settings as required.
  5. Click OK.
To import a QoS profile:
  1. Go to AP Manager.
  2. In the tree menu, click WiFi Profiles > QoS Profile (or from the tabs in version 5.6 ADOMs). The QoS Profile pane opens.
  3. In the toolbar, click Import. The Import dialog box opens.
  4. From the FortiGate dropdown, select a device.
  5. Click the Profiles field, and select a profile from the list.
  6. Click OK.
  7. Click OK.