Bonjour profiles

You can create, edit, and import Bonjour profiles, or view where a profile is used.

To view Bonjour profiles:

1. If using ADOMs, ensure that you are in the correct ADOM.
2. Go to AP Manager > Connectivity Profiles > Bonjour Profiles.

   The following options are available in the toolbar and right-click menu:

   Create New	Create a new Bonjour profile.
   Edit	Edit the selected Bonjour profile.
   Delete	Delete the selected Bonjour profile.
   Clone	Clone the selected Bonjour profile.
   Where Used	View where the selected Bonjour profile is used.
   Import	Import Bonjour profiles from a connected FortiGate (toolbar only).

To create a new Bonjour profile:

1. If using ADOMs, ensure that you are in the correct ADOM.
2. Go to AP Manager > Connectivity Profiles > Bonjour Profiles.
3. In the toolbar, click Create New.

   The Create New Bonjour Profile pane opens.

   

4. Enter the following information, and then click OK to create the Bonjour profile:

   Name		Enter a name for the profile.
   Comments		Optionally, enter comments.
   Policy List		Configure the policy list.
   	Create New	Create a new policy list entry. Select the following, then click OK: Description: Description of the Bonjour profile policy. From VLAN: The VLAN ID that the Bonjour service will be advertised from (0 - 4094, default = 0). To VLAN: The VLAN ID that the Bonjour service will be made available to (0 - 4094, default = all). Services: Services for the VLAN.
   	Edit	Edit the selected entry.
   	Delete	Delete the selected entries.

You can edit, delete, clone and import existing profiles, as well as see where the profile is being used.

To edit a profile:

1. Select the profile to edit.
2. In the toolbar, click Edit.

   Alternatively, you can right-click the profile and select Edit, or double-click a profile.

3. Edit the settings as required.
4. Click OK to apply your changes.

To delete profiles:

1. Select the profile(s) to be deleted.
2. In the toolbar, click Delete.

   Alternatively, right-click the profile and select Delete.

3. Click OK.

To clone a profile:

1. Select a profile in the list.
2. In the toolbar, click Clone.

   Alternatively, right-click a profile and select Clone.

3. Edit the name of the profile, then edit the remaining settings as required.
4. Click OK to clone the profile.

To import a profile:

1. In the toolbar, click Import.

   The Import dialog opens.

2. From the FortiGate dropdown, select a device. The list will include all of the devices in the current ADOM.
3. From the Profiles dropdown, select a profile.
4. Click OK.

To view where a profile is used:

1. Select the profile.
2. In the toolbar, click More > Where Used.

   Alternatively, you can right-click the profile and select Where Used.

   The Where <profile name> is used pane opens.

3. Click Close.