firewall shaping-policy

Use this command to configure policies that are based on traffic shaping.

History

The following table shows all newly added, changed, or removed entries as of FortiOS 6.0.

config firewall shaping-policy
    edit {id}
    # Configure shaping policies.
        set id {integer}   Shaping policy ID. range[0-4294967295]
        set comment {string}   Comments. size[255]
        set status {enable | disable}   Enable/disable this traffic shaping policy.
        set ip-version {4 | 6}   Apply this traffic shaping policy to IPv4 or IPv6 traffic.
                4  Use IPv4 addressing for Configuration Method.
                6  Use IPv6 addressing for Configuration Method.
        config srcaddr
            edit {name}
            # IPv4 source address and address group names.
                set name {string}   Address name. size[64] - datasource(s): firewall.address.name,firewall.addrgrp.name
            next
        config dstaddr
            edit {name}
            # IPv4 destination address and address group names.
                set name {string}   Address name. size[64] - datasource(s): firewall.address.name,firewall.addrgrp.name
            next
        config srcaddr6
            edit {name}
            # IPv6 source address and address group names.
                set name {string}   Address name. size[64] - datasource(s): firewall.address6.name,firewall.addrgrp6.name
            next
        config dstaddr6
            edit {name}
            # IPv6 destination address and address group names.
                set name {string}   Address name. size[64] - datasource(s): firewall.address6.name,firewall.addrgrp6.name
            next
        set internet-service {enable | disable}   Enable/disable use of Internet Services for this policy. If enabled, destination address and service are not used. 
        config internet-service-id
            edit {id}
            # Internet Service ID.
                set id {integer}   Internet Service ID. range[0-4294967295] - datasource(s): firewall.internet-service.id
            next
        config internet-service-custom
            edit {name}
            # Custom Internet Service name.
                set name {string}   Custom Internet Service name. size[64] - datasource(s): firewall.internet-service-custom.name
            next
        set internet-service-src {enable | disable}   Enable/disable use of Internet Services in source for this policy. If enabled, source address is not used. 
        config internet-service-src-id
            edit {id}
            # Internet Service source ID.
                set id {integer}   Internet Service ID. range[0-4294967295] - datasource(s): firewall.internet-service.id
            next
        config internet-service-src-custom
            edit {name}
            # Custom Internet Service source name.
                set name {string}   Custom Internet Service name. size[64] - datasource(s): firewall.internet-service-custom.name
            next
        config service
            edit {name}
            # Service and service group names.
                set name {string}   Service name. size[64] - datasource(s): firewall.service.custom.name,firewall.service.group.name
            next
        set schedule {string}   Schedule name. size[35] - datasource(s): firewall.schedule.onetime.name,firewall.schedule.recurring.name,firewall.schedule.group.name
        config users
            edit {name}
            # Apply this traffic shaping policy to individual users that have authenticated with the FortiGate.
                set name {string}   User name. size[64] - datasource(s): user.local.name
            next
        config groups
            edit {name}
            # Apply this traffic shaping policy to user groups that have authenticated with the FortiGate.
                set name {string}   Group name. size[64] - datasource(s): user.group.name
            next
        config application
            edit {id}
            # IDs of one or more applications that this shaper applies application control traffic shaping to.
                set id {integer}   Application IDs. range[0-4294967295]
            next
        config app-category
            edit {id}
            # IDs of one or more application categories that this shaper applies application control traffic shaping to.
                set id {integer}   Category IDs. range[0-4294967295]
            next
        config url-category
            edit {id}
            # IDs of one or more FortiGuard Web Filtering categories that this shaper applies traffic shaping to.
                set id {integer}   URL category ID. range[0-4294967295]
            next
        config dstintf
            edit {name}
            # One or more outgoing (egress) interfaces.
                set name {string}   Interface name. size[64] - datasource(s): system.interface.name,system.zone.name
            next
        set traffic-shaper {string}   Traffic shaper to apply to traffic forwarded by the firewall policy. size[35] - datasource(s): firewall.shaper.traffic-shaper.name
        set traffic-shaper-reverse {string}   Traffic shaper to apply to response traffic received by the firewall policy. size[35] - datasource(s): firewall.shaper.traffic-shaper.name
        set per-ip-shaper {string}   Per-IP traffic shaper to apply with this policy. size[35] - datasource(s): firewall.shaper.per-ip-shaper.name
        set class-id {integer}   Traffic class ID. range[2-31]
    next
end

Additional information

The following section is for those options that require additional explanation.