Fortinet Document Library

Version:


Table of Contents

CLI Reference

6.0.0
Download PDF
Copy Link

system vdom-sflow

Configure sFlow for this VDOM.

config system vdom-sflow
    set vdom-sflow {enable | disable}   Enable/disable the sFlow configuration for the current VDOM.
    set collector-ip {ipv4 address}   IP address of the sFlow collector that sFlow agents added to interfaces in this VDOM send sFlow datagrams to (default = 0.0.0.0).
    set collector-port {integer}   UDP port number used for sending sFlow datagrams (configure only if required by your sFlow collector or your network configuration) (0 - 65535, default = 6343). range[0-65535]
    set source-ip {ipv4 address}   Source IP address for sFlow agent.
end

system vdom-sflow

Configure sFlow for this VDOM.

config system vdom-sflow
    set vdom-sflow {enable | disable}   Enable/disable the sFlow configuration for the current VDOM.
    set collector-ip {ipv4 address}   IP address of the sFlow collector that sFlow agents added to interfaces in this VDOM send sFlow datagrams to (default = 0.0.0.0).
    set collector-port {integer}   UDP port number used for sending sFlow datagrams (configure only if required by your sFlow collector or your network configuration) (0 - 65535, default = 6343). range[0-65535]
    set source-ip {ipv4 address}   Source IP address for sFlow agent.
end