wireless-controller timers

Use this command to alter global timers for physical access points, also known as WTPs configured using CAPWAP.

config wireless-controller timers
    set echo-interval {integer}   Time between echo requests sent by the managed WTP, AP, or FortiAP (1 - 255 sec, default = 30). range[1-255]
    set discovery-interval {integer}   Time between discovery requests (2 - 180 sec, default = 5). range[2-180]
    set client-idle-timeout {integer}   Time after which a client is considered idle and times out (20 - 3600 sec, default = 300, 0 for no timeout). range[20-3600]
    set rogue-ap-log {integer}   Time between logging rogue AP messages if periodic rogue AP logging is configured (0 - 1440 min, default = 0). range[0-1440]
    set fake-ap-log {integer}   Time between recording logs about fake APs if periodic fake AP logging is configured (0 - 1440 min, default = 1). range[1-1440]
    set darrp-optimize {integer}   Time for running Dynamic Automatic Radio Resource Provisioning (DARRP) optimizations (0 - 86400 sec, default = 1800). range[0-86400]
    set darrp-day {option}   Weekday on which to run DARRP optimization.
            sunday     Sunday.
            monday     Monday.
            tuesday    Tuesday.
            wednesday  Wednesday.
            thursday   Thursday.
            friday     Friday.
            saturday   Saturday.
    config darrp-time
        edit {time}
        # Time at which DARRP optimizations run (you can add up to 8 times).
            set time {string}   Time. size[5]
        next
    set sta-stats-interval {integer}   Time between running client (station) reports (1 - 255 sec, default = 1). range[1-255]
    set vap-stats-interval {integer}   Time between running Virtual Access Point (VAP) reports (1 - 255 sec, default = 15). range[1-255]
    set radio-stats-interval {integer}   Time between running radio reports (1 - 255 sec, default = 15). range[1-255]
    set sta-capability-interval {integer}   Time between running station capability reports (1 - 255 sec, default = 30). range[1-255]
    set sta-locate-timer {integer}   Time between running client presence flushes to remove clients that are listed but no longer present (0 - 86400 sec, default = 1800). range[0-86400]
    set ipsec-intf-cleanup {integer}   Time period to keep IPsec VPN interfaces up after WTP sessions are disconnected (30 - 3600 sec, default = 120). range[30-3600]
    set ble-scan-report-intv {integer}   Time between running Bluetooth Low Energy (BLE) reports (10 - 3600 sec, default = 30). range[10-3600]
end

echo-interval

Period of time in seconds before the WTP sends Echo Requests after joining AC. Set the value between 1-255 (or one second to four minutes and 25 seconds). The default is set to 30.

discovery-interval

Period of time in seconds between discovery requests. Set the value between 2-180 (or two seconds to three minutes). The default is set to 5.

client-idle-timeout

Period of time in seconds before client is considered idle and timeouts. Set the value between 20-3600 (or 20 seconds to one hour), or 0 for no timeout. The default is set to 300.

rogue-ap-log

Intervals of time in minutes for periodic logging of rogue APs. Set the value between 0-1440 (or no logging to one day). The default is set to 0.

fake-ap-log

Intervals of time in minutes for periodic logging of fake APs. Fake APs serve to attract potential hackers and other intruders so as to collect information about them. Set the value between 0-1440 (or no interval to one day). The default is set to 1.

darrp-optimize

Intervals of time in seconds for Dynamic Automatic Radio Resource Provisioning (DARRP) optimization. Set the value between 0-86400 (or no interval to one day). The default is set to 1800.

sta-stats-interval

Intervals of time in seconds between station statistic reports. Set the value between 1-255 (or one second to four minutes and 25 seconds). The default is set to 1.

vap-stats-interval

Intervals of time in seconds between VAP statistic reports. Set the value between 1-255 (or one second to four minutes and 25 seconds). The default is set to 15.

radio-stats-interval

Intervals of time in seconds between radio statistic reports. Set the value between 1-255 (or one second to four minutes and 25 seconds). The default is set to 15.

sta-capability-interval

Intervals of time in seconds between station capability reports. Set the value between 1-255 (or one second to four minutes and 25 seconds). The default is set to 30.

sta-locate-timer

Intervals of time in seconds between station presence flushes by the WTP. Set the value between 0-86400 (or no interval to one day). The default is set to 1800.

ipsec-intf-cleanup

Time period to keep IPsec VPN interface after WTP sessions are disconnected (default = 120 sec).