system virtual-switch
Use this command to configure virtual switch interfaces on the FortiGate models that support this feature.
config system virtual-switch edit {name} # Configure virtual hardware switch interfaces. set name {string} Name of the virtual switch. size[15] set physical-switch {string} Physical switch parent. size[15] - datasource(s): system.physical-switch.name config port edit {name} # Configure member ports. set name {string} Physical interface name. size[15] set speed {option} Interface speed. auto Automatically adjust speed. 10full 10M full-duplex. 10half 10M half-duplex. 100full 100M full-duplex. 100half 100M half-duplex. 1000full 1000M full-duplex. 1000half 1000M half-duplex. 1000auto 1000M auto adjust. set status {up | down} Interface status. up Interface up. down Interface down. set alias {string} Alias. size[25] next set span {disable | enable} Enable/disable SPAN. set span-source-port {string} SPAN source ports. size[15] set span-dest-port {string} SPAN destination port. size[15] set span-direction {rx | tx | both} SPAN direction. rx Span receive direction only. tx Span transmit direction only. both Span both directions. next end