Fortinet black logo

CLI Reference

tracert6

tracert6

Test the connection between the FortiGate unit and another network device using IPv6 protocol, and display information about the network hops between the device and the FortiGate unit.

Syntax

execute tracert6  Traceroute for IPv6.

You can use the following options:

Variable Description
-F Set Don’t Fragment bit.
-d Enable debugging.
-n Do not resolve numeric address to domain name.
-f <first_ttl> Set the initial time-to-live used in the first outgoing probe packet.
-i <interface> Select interface to use for tracert.
-m <max_ttl> Set the max time-to-live (max number of hops) used in outgoing probe packets.
-s <src_addr> Set the source IP address to use in outgoing probe packets.
-q <nprobes> Set the number probes per hop.
-w <waittime> Set the time in seconds to wait for response to a probe. Default is 5.
-z <sendwait> Set the time in milliseconds to pause between probes.
host Enter the IP address or FQDN to probe.
<paddatalen> Set the packet size to use when probing.

tracert6

Test the connection between the FortiGate unit and another network device using IPv6 protocol, and display information about the network hops between the device and the FortiGate unit.

Syntax

execute tracert6  Traceroute for IPv6.

You can use the following options:

Variable Description
-F Set Don’t Fragment bit.
-d Enable debugging.
-n Do not resolve numeric address to domain name.
-f <first_ttl> Set the initial time-to-live used in the first outgoing probe packet.
-i <interface> Select interface to use for tracert.
-m <max_ttl> Set the max time-to-live (max number of hops) used in outgoing probe packets.
-s <src_addr> Set the source IP address to use in outgoing probe packets.
-q <nprobes> Set the number probes per hop.
-w <waittime> Set the time in seconds to wait for response to a probe. Default is 5.
-z <sendwait> Set the time in milliseconds to pause between probes.
host Enter the IP address or FQDN to probe.
<paddatalen> Set the packet size to use when probing.