router auth-path

Authentication based routing allows firewall policies to direct network traffic flows.

This command configures a RADIUS object on your FortiGate unit. The same object is required to be configured on the RADIUS server.

This command is not available when the FortiGate is in Transparent mode.

config router auth-path
    edit {name}
    # Configure authentication based routing.
        set name {string}   Name of the entry. size[15]
        set device {string}   Outgoing interface. size[35] - datasource(s): system.interface.name
        set gateway {ipv4 address}   Gateway IP address.
    next
end