system interface physical
Use this command to list information about the unit’s physical network interfaces.
Syntax
get system interface physical
The output looks like this:
# get system interface physical
== [onboard]
==[dmz1]
mode: static
ip: 0.0.0.0 0.0.0.0
status: down
speed: n/a
==[dmz2]
mode: static
ip: 0.0.0.0 0.0.0.0
status: down
speed: n/a
==[internal]
mode: static
ip: 172.20.120.146 255.255.255.0
status: up
speed: 100
==[wan1]
mode: pppoe
ip: 0.0.0.0 0.0.0.0
status: down
speed: n/a
==[wan2]
mode: static
ip: 0.0.0.0 0.0.0.0
status: down
speed: n/a
==[modem]
mode: static
ip: 0.0.0.0 0.0.0.0
status: down
speed: n/a