web-proxy wisp
Use this command to configure web proxy Websense wireless Internet service provider (WISP) servers.
config web-proxy wisp edit {name} # Configure Wireless Internet service provider (WISP) servers. set name {string} Server name. size[35] set comment {string} Comment. size[255] set outgoing-ip {ipv4 address any} WISP outgoing IP address. set server-ip {ipv4 address any} WISP server IP address. set server-port {integer} WISP server port (1 - 65535, default = 15868). range[1-65535] set max-connections {integer} Maximum number of web proxy WISP connections (4 - 4096, default = 64). range[4-4096] set timeout {integer} Period of time before WISP requests time out (1 - 15 sec, default = 5). range[1-15] next end
Additional information
The following section is for those options that require additional explanation.
comment [string]
Optional comments.
outgoing-ip <ip-address>
WISP outgoing IP address.
server-ip <ip-address>
WISP server IP address.
server-port <port>
WISP server port. Set the value between 1-65535. The default is set to 15868
.
max-connections <integer>
Maximum number of web proxy WISP connections. Set the value between 4-4096. The default is set to 64
.
timeout <seconds>
Period of time in seconds before WISP requests timeout. Set the value between 1-15. The default is set to 5
.