Fortinet black logo

CLI Reference

router info multicast

router info multicast

Use this command to display information about a Protocol Independent Multicasting (PIM) configuration. Multicast routing is supported in the root virtual domain only.

Syntax

get router info multicast <keywords>

<keywords> Description

igmp

Show Internet Group Management Protocol (IGMP) membership information according to one of these qualifiers:

Type groups [{<interface-name> | <group-address>}] to show IGMP information for the multicast group(s) associated with the specified interface or multicast group address.

Type groups-detail [{<interface-name> | <group-address>}] to show detailed IGMP information for the multicast group(s) associated with the specified interface or multicast group address.

Type interface [<interface-name>] to show IGMP information for all multicast groups associated with the specified interface.

pim dense-mode

Show information related to dense mode operation according to one of these qualifiers:

Type interface to show information about PIM-enabled interfaces.

Type interface-detail to show detailed information about PIM-enabled interfaces.

Type neighbor to show the current status of PIM neighbors.

Type neighbor-detail to show detailed information about PIM neighbors.

Type next-hop to show information about next-hop PIM routers.

Type table [<group-address>][<source-address>] to show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.

pim sparse-mode

Show information related to sparse mode operation according to one of these qualifiers:

Type bsr-info to show Boot Strap Router (BSR) information.

Type interface to show information about PIM-enabled interfaces.

Type interface-detail to show detailed information about PIM-enabled interfaces.

Type neighbor to show the current status of PIM neighbors.

Type neighbor-detail to show detailed information about PIM neighbors.

Type next-hop to show information about next-hop PIM routers.

Type rp-mapping to show Rendezvous Point (RP) information.

Type table [<group-address>][<source-address>] to show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.

table [<group‑address>] [<source‑address>]

Show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.

table-count [<group‑address>]
[<source‑address>]

Show statistics related to the specified multicast group address and/or multicast source address.

router info multicast

Use this command to display information about a Protocol Independent Multicasting (PIM) configuration. Multicast routing is supported in the root virtual domain only.

Syntax

get router info multicast <keywords>

<keywords> Description

igmp

Show Internet Group Management Protocol (IGMP) membership information according to one of these qualifiers:

Type groups [{<interface-name> | <group-address>}] to show IGMP information for the multicast group(s) associated with the specified interface or multicast group address.

Type groups-detail [{<interface-name> | <group-address>}] to show detailed IGMP information for the multicast group(s) associated with the specified interface or multicast group address.

Type interface [<interface-name>] to show IGMP information for all multicast groups associated with the specified interface.

pim dense-mode

Show information related to dense mode operation according to one of these qualifiers:

Type interface to show information about PIM-enabled interfaces.

Type interface-detail to show detailed information about PIM-enabled interfaces.

Type neighbor to show the current status of PIM neighbors.

Type neighbor-detail to show detailed information about PIM neighbors.

Type next-hop to show information about next-hop PIM routers.

Type table [<group-address>][<source-address>] to show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.

pim sparse-mode

Show information related to sparse mode operation according to one of these qualifiers:

Type bsr-info to show Boot Strap Router (BSR) information.

Type interface to show information about PIM-enabled interfaces.

Type interface-detail to show detailed information about PIM-enabled interfaces.

Type neighbor to show the current status of PIM neighbors.

Type neighbor-detail to show detailed information about PIM neighbors.

Type next-hop to show information about next-hop PIM routers.

Type rp-mapping to show Rendezvous Point (RP) information.

Type table [<group-address>][<source-address>] to show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.

table [<group‑address>] [<source‑address>]

Show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.

table-count [<group‑address>]
[<source‑address>]

Show statistics related to the specified multicast group address and/or multicast source address.