system ipv6-tunnel
Use this command to tunnel IPv4 traffic over an IPv6 network. The IPv6 interface is configured under config system interface. All subnets between the source and destination addresses must support IPv6.
This command is not available in Transparent mode |
config system ipv6-tunnel edit {name} # Configure IPv6/IPv4 in IPv6 tunnel. set name {string} IPv6 tunnel name. size[15] set source {ipv6 address} Local IPv6 address of the tunnel. set destination {ipv6 address} Remote IPv6 address of the tunnel. set interface {string} Interface name. size[15] - datasource(s): system.interface.name set auto-asic-offload {enable | disable} Enable/disable tunnel ASIC offloading. next end