Fortinet Document Library

Version:


Table of Contents

CLI Reference

6.0.0
Download PDF
Copy Link

system alarm

Use this command to configure the system alarm. The alarm can be triggered by events or by exceeding configured thresholds.

config system alarm
    set status {enable | disable}   Enable/disable alarm.
    set audible {enable | disable}   Enable/disable audible alarm.
    config groups
        edit {id}
        # Alarm groups.
            set id {integer}   Group ID. range[0-4294967295]
            set period {integer}   Time period in seconds (0 = from start up). range[0-4294967295]
            set admin-auth-failure-threshold {integer}   Admin authentication failure threshold. range[0-1024]
            set admin-auth-lockout-threshold {integer}   Admin authentication lockout threshold. range[0-1024]
            set user-auth-failure-threshold {integer}   User authentication failure threshold. range[0-1024]
            set user-auth-lockout-threshold {integer}   User authentication lockout threshold. range[0-1024]
            set replay-attempt-threshold {integer}   Replay attempt threshold. range[0-1024]
            set self-test-failure-threshold {integer}   Self-test failure threshold. range[0-1]
            set log-full-warning-threshold {integer}   Log full warning threshold. range[0-1024]
            set encryption-failure-threshold {integer}   Encryption failure threshold. range[0-1024]
            set decryption-failure-threshold {integer}   Decryption failure threshold. range[0-1024]
            config fw-policy-violations
                edit {id}
                # Firewall policy violations.
                    set id {integer}   Firewall policy violations ID. range[0-4294967295]
                    set threshold {integer}   Firewall policy violation threshold. range[0-1024]
                    set src-ip {ipv4 address}   Source IP (0=all).
                    set dst-ip {ipv4 address}   Destination IP (0=all).
                    set src-port {integer}   Source port (0=all). range[0-65535]
                    set dst-port {integer}   Destination port (0=all). range[0-65535]
                next
            set fw-policy-id {integer}   Firewall policy ID. range[0-4294967295]
            set fw-policy-id-threshold {integer}   Firewall policy ID threshold. range[0-1024]
        next
end

Additional information

The following section is for those options that require additional explanation.

system alarm

Use this command to configure the system alarm. The alarm can be triggered by events or by exceeding configured thresholds.

config system alarm
    set status {enable | disable}   Enable/disable alarm.
    set audible {enable | disable}   Enable/disable audible alarm.
    config groups
        edit {id}
        # Alarm groups.
            set id {integer}   Group ID. range[0-4294967295]
            set period {integer}   Time period in seconds (0 = from start up). range[0-4294967295]
            set admin-auth-failure-threshold {integer}   Admin authentication failure threshold. range[0-1024]
            set admin-auth-lockout-threshold {integer}   Admin authentication lockout threshold. range[0-1024]
            set user-auth-failure-threshold {integer}   User authentication failure threshold. range[0-1024]
            set user-auth-lockout-threshold {integer}   User authentication lockout threshold. range[0-1024]
            set replay-attempt-threshold {integer}   Replay attempt threshold. range[0-1024]
            set self-test-failure-threshold {integer}   Self-test failure threshold. range[0-1]
            set log-full-warning-threshold {integer}   Log full warning threshold. range[0-1024]
            set encryption-failure-threshold {integer}   Encryption failure threshold. range[0-1024]
            set decryption-failure-threshold {integer}   Decryption failure threshold. range[0-1024]
            config fw-policy-violations
                edit {id}
                # Firewall policy violations.
                    set id {integer}   Firewall policy violations ID. range[0-4294967295]
                    set threshold {integer}   Firewall policy violation threshold. range[0-1024]
                    set src-ip {ipv4 address}   Source IP (0=all).
                    set dst-ip {ipv4 address}   Destination IP (0=all).
                    set src-port {integer}   Source port (0=all). range[0-65535]
                    set dst-port {integer}   Destination port (0=all). range[0-65535]
                next
            set fw-policy-id {integer}   Firewall policy ID. range[0-4294967295]
            set fw-policy-id-threshold {integer}   Firewall policy ID threshold. range[0-1024]
        next
end

Additional information

The following section is for those options that require additional explanation.