wireless-controller upload‑wtp‑image

Use this command to upload a FortiWiFi firmware image to the FortiGate unit. Wireless APs controlled by this wireless controller can download the image as needed. Use the execute wireless-controller reset‑wtp command to trigger FortiAP units to update their firmware.

Syntax

FTP:

execute wireless-controller upload-wtp-image ftp  Upload a WTP image from FTP server.
        {string}   WTP image file name on the remote server.
            {ftp server}[:ftp port]   FTP server IP, can be attached with port.
                {Enter}|{user}   FTP username may be needed.
                    {passwd}   FTP password.

TFTP:

execute wireless-controller upload-wtp-image tftp  Upload a WTP image from TFTP server.
        {string}   File name on the TFTP server.
            {ip}   IP address of TFTP server.