Fortinet Document Library

Version:


Table of Contents

CLI Reference

6.0.0
Download PDF
Copy Link

set-next-reboot

Use this command to start the FortiGate unit with primary or secondary firmware after the next reboot. Available on models that can store two firmware images. By default, the FortiGate unit loads the firmware from the primary partition.

VDOM administrators do not have permission to run this command. It must be executed by a super administrator.

Syntax

execute set-next-reboot  set next reboot command
        {primary/secondary}   partition

set-next-reboot

Use this command to start the FortiGate unit with primary or secondary firmware after the next reboot. Available on models that can store two firmware images. By default, the FortiGate unit loads the firmware from the primary partition.

VDOM administrators do not have permission to run this command. It must be executed by a super administrator.

Syntax

execute set-next-reboot  set next reboot command
        {primary/secondary}   partition