Fortinet black logo

CLI Reference

wireless-controller utm-profile

wireless-controller utm-profile

Use this command to configure Unified Threat Management (UTM) profiles in order to enforce UTM policies on a local bridge SSID when Smart AP's are managed by FortiGate. These profiles can be assigned under config wireless-controller vap.

History

The following table shows all newly added, changed, or removed entries as of FortiOS 6.0.

Command Description

config wireless-controller utm-profile

New config command.

Configure UTM profiles.

config wireless-controller utm-profile
    edit {name}
    # Configure UTM (Unified Threat Management) profile.
        set name {string}   UTM profile name. size[35]
        set comment {string}   Comment. size[63]
        set utm-log {enable | disable}   Enable/disable UTM logging.
        set ips-sensor {string}   IPS sensor name. size[35] - datasource(s): ips.sensor.name
        set application-list {string}   Application control list name. size[35] - datasource(s): application.list.name
        set antivirus-profile {string}   AntiVirus profile name. size[35] - datasource(s): antivirus.profile.name
        set webfilter-profile {string}   WebFilter profile name. size[35] - datasource(s): webfilter.profile.name
        set scan-botnet-connections {disable | monitor | block}   Block or monitor connections to Botnet servers or disable Botnet scanning.
                disable  Do not scan connections to botnet servers.
                monitor  Log connections to botnet servers.
                block    Block connections to botnet servers.
    next
end

wireless-controller utm-profile

Use this command to configure Unified Threat Management (UTM) profiles in order to enforce UTM policies on a local bridge SSID when Smart AP's are managed by FortiGate. These profiles can be assigned under config wireless-controller vap.

History

The following table shows all newly added, changed, or removed entries as of FortiOS 6.0.

Command Description

config wireless-controller utm-profile

New config command.

Configure UTM profiles.

config wireless-controller utm-profile
    edit {name}
    # Configure UTM (Unified Threat Management) profile.
        set name {string}   UTM profile name. size[35]
        set comment {string}   Comment. size[63]
        set utm-log {enable | disable}   Enable/disable UTM logging.
        set ips-sensor {string}   IPS sensor name. size[35] - datasource(s): ips.sensor.name
        set application-list {string}   Application control list name. size[35] - datasource(s): application.list.name
        set antivirus-profile {string}   AntiVirus profile name. size[35] - datasource(s): antivirus.profile.name
        set webfilter-profile {string}   WebFilter profile name. size[35] - datasource(s): webfilter.profile.name
        set scan-botnet-connections {disable | monitor | block}   Block or monitor connections to Botnet servers or disable Botnet scanning.
                disable  Do not scan connections to botnet servers.
                monitor  Log connections to botnet servers.
                block    Block connections to botnet servers.
    next
end