webfilter {ips-urlfilter-setting | ips-urlfilter-setting6}
Use this command to configure IPV4 and IPv6 IPS URL filter settings.
|
Similar entries can be found under both ips-urlfilter-setting and ips-urlfilter-setting6, so only one CLI syntax is shown. |
History
The following table shows all newly added, changed, or removed entries as of FortiOS 6.0.
| Command | Description |
|---|---|
|
config webfilter ips-urlfilter-setting6 |
Configure IPS URL filter settings for IPv6. |
|
config webfilter {ips-urlfilter-setting | ips-urlfilter-setting6} edit <address> set geo-filter <country name> next end |
Filter based on geographical location. Note that the route will not be installed if the resolved IP address belongs to the country in the filter. |
config webfilter ips-urlfilter-setting
set device {string} Interface for this route. size[35] - datasource(s): system.interface.name
set distance {integer} Administrative distance (1 - 255) for this route. range[1-255]
set gateway {ipv4 address} Gateway IP address for this route.
set geo-filter {string} Filter based on geographical location. Route will NOT be installed if the resolved IP address belongs to the country in the filter. size[255]
end