wireless-controller qos-profile
Configure quality of service (QoS) profiles where you can add WiFi multi-media (WMM) control and Differentiated Services Code Point (DSCP) mapping.
Note that:
call-capacity
andbandwidth-admission-control
are only available whencall-admission-control
is set toenable
.bandwidth-capacity
is only available whenbandwidth-admission-control
is set toenable
.- All DSCP mapping options are only available when
dscp-wmm-mapping
is set toenable
. wmm
is already set toenable
by default. Ifwmm
is set todisable
, the following entries are not available:wmm-uapsd
,call-admission-control
, anddscp-wmm-mapping
.
QoS profiles can be assigned under the config wireless-controller vap
command using qos-profile
.
config wireless-controller qos-profile edit {name} # Configure WiFi quality of service (QoS) profiles. set name {string} WiFi QoS profile name. size[35] set comment {string} Comment. size[63] set uplink {integer} Maximum uplink bandwidth for Virtual Access Points (VAPs) (0 - 2097152 Kbps, default = 0, 0 means no limit). range[0-2097152] set downlink {integer} Maximum downlink bandwidth for Virtual Access Points (VAPs) (0 - 2097152 Kbps, default = 0, 0 means no limit). range[0-2097152] set uplink-sta {integer} Maximum uplink bandwidth for clients (0 - 2097152 Kbps, default = 0, 0 means no limit). range[0-2097152] set downlink-sta {integer} Maximum downlink bandwidth for clients (0 - 2097152 Kbps, default = 0, 0 means no limit). range[0-2097152] set burst {enable | disable} Enable/disable client rate burst. set wmm {enable | disable} Enable/disable WiFi multi-media (WMM) control. set wmm-uapsd {enable | disable} Enable/disable WMM Unscheduled Automatic Power Save Delivery (U-APSD) power save mode. set call-admission-control {enable | disable} Enable/disable WMM call admission control. set call-capacity {integer} Maximum number of Voice over WLAN (VoWLAN) phones allowed (0 - 60, default = 10). range[0-60] set bandwidth-admission-control {enable | disable} Enable/disable WMM bandwidth admission control. set bandwidth-capacity {integer} Maximum bandwidth capacity allowed (1 - 600000 Kbps, default = 2000). range[1-600000] set dscp-wmm-mapping {enable | disable} Enable/disable Differentiated Services Code Point (DSCP) mapping. config dscp-wmm-vo edit {id} # DSCP mapping for voice access (default = 48 56). set id {integer} DSCP WMM mapping numbers (0 - 63). range[0-63] next config dscp-wmm-vi edit {id} # DSCP mapping for video access (default = 32 40). set id {integer} DSCP WMM mapping numbers (0 - 63). range[0-63] next config dscp-wmm-be edit {id} # DSCP mapping for best effort access (default = 0 24). set id {integer} DSCP WMM mapping numbers (0 - 63). range[0-63] next config dscp-wmm-bk edit {id} # DSCP mapping for background access (default = 8 16). set id {integer} DSCP WMM mapping numbers (0 - 63). range[0-63] next next end
comment
Optional comment.
uplink
Maximum uplink bandwidth for VAP in Kbps (0 - 2097152, default = 0).
downlink
Maximum downlink bandwidth for VAP in Kbps (0 - 2097152, default = 0).
uplink-sta
Maximum uplink bandwidth for STA in Kbps (0 - 2097152, default = 0).
downlink-sta
Maximum downlink bandwidth for STA in Kbps (0 - 2097152, default = 0).
burst
Enable or disable (by default) STA rate burst.
wmm
Enable (by default) or disable WiFi multi-media (WMM) control.
wmm-uapsd
Enable (by default) or disable WMM Unscheduled Automatic Power Save Delivery (U-APSD) power save mode.
call-admission-control
Enable or disable (by default) WMM call admission control.
call-capacity
Maximum number of VoWLAN phones allowed (0 - 60, default = 10)
bandwidth-admission-control
Enable or disable (by default) WMM bandwidth admission control.
bandwidth-capacity
Maximum bandwidth capacity allowed in Kbps (1 - 600000, default = 2000).
dscp-wmm-mapping
Enable or disable (by default) Differentiated Services Code Point (DSCP) mapping.
dscp-wmm-vo
DSCP mapping for voice access category (default = 48 56).
dscp-wmm-vi
DSCP mapping for video access category (default = 32 40).
dscp-wmm-be
DSCP mapping for best effort access category (default = 0 24).
dscp-wmm-bk
DSCP mapping for background access category (default = 8 16).