router info multicast

Use this command to display information about a Protocol Independent Multicasting (PIM) configuration. Multicast routing is supported in the root virtual domain only.

Syntax

get router info multicast <keywords>

<keywords>	Description
igmp	Show Internet Group Management Protocol (IGMP) membership information according to one of these qualifiers: Type `groups [{<interface-name> \| <group-address>}]` to show IGMP information for the multicast group(s) associated with the specified interface or multicast group address. Type `groups-detail [{<interface-name> \| <group-address>}]` to show detailed IGMP information for the multicast group(s) associated with the specified interface or multicast group address. Type `interface [<interface-name>]` to show IGMP information for all multicast groups associated with the specified interface.
pim dense-mode	Show information related to dense mode operation according to one of these qualifiers: Type `interface` to show information about PIM-enabled interfaces. Type `interface-detail` to show detailed information about PIM-enabled interfaces. Type `neighbor` to show the current status of PIM neighbors. Type `neighbor-detail` to show detailed information about PIM neighbors. Type `next-hop` to show information about next-hop PIM routers. Type `table [<group-address>][<source-address>]` to show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.
pim sparse-mode	Show information related to sparse mode operation according to one of these qualifiers: Type `bsr-info` to show Boot Strap Router (BSR) information. Type `interface` to show information about PIM-enabled interfaces. Type `interface-detail` to show detailed information about PIM-enabled interfaces. Type `neighbor` to show the current status of PIM neighbors. Type `neighbor-detail` to show detailed information about PIM neighbors. Type `next-hop` to show information about next-hop PIM routers. Type `rp-mapping` to show Rendezvous Point (RP) information. Type `table [<group-address>][<source-address>]` to show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.
table [<group‑address>] [<source‑address>]	Show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.
table-count [<group‑address>] [<source‑address>]	Show statistics related to the specified multicast group address and/or multicast source address.

router info multicast

Use this command to display information about a Protocol Independent Multicasting (PIM) configuration. Multicast routing is supported in the root virtual domain only.

Syntax

get router info multicast <keywords>

<keywords>	Description
igmp	Show Internet Group Management Protocol (IGMP) membership information according to one of these qualifiers: Type `groups [{<interface-name> \| <group-address>}]` to show IGMP information for the multicast group(s) associated with the specified interface or multicast group address. Type `groups-detail [{<interface-name> \| <group-address>}]` to show detailed IGMP information for the multicast group(s) associated with the specified interface or multicast group address. Type `interface [<interface-name>]` to show IGMP information for all multicast groups associated with the specified interface.
pim dense-mode	Show information related to dense mode operation according to one of these qualifiers: Type `interface` to show information about PIM-enabled interfaces. Type `interface-detail` to show detailed information about PIM-enabled interfaces. Type `neighbor` to show the current status of PIM neighbors. Type `neighbor-detail` to show detailed information about PIM neighbors. Type `next-hop` to show information about next-hop PIM routers. Type `table [<group-address>][<source-address>]` to show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.
pim sparse-mode	Show information related to sparse mode operation according to one of these qualifiers: Type `bsr-info` to show Boot Strap Router (BSR) information. Type `interface` to show information about PIM-enabled interfaces. Type `interface-detail` to show detailed information about PIM-enabled interfaces. Type `neighbor` to show the current status of PIM neighbors. Type `neighbor-detail` to show detailed information about PIM neighbors. Type `next-hop` to show information about next-hop PIM routers. Type `rp-mapping` to show Rendezvous Point (RP) information. Type `table [<group-address>][<source-address>]` to show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.
table [<group‑address>] [<source‑address>]	Show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.
table-count [<group‑address>] [<source‑address>]	Show statistics related to the specified multicast group address and/or multicast source address.

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

Web Application / API Protection

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

All Products

CLI Reference

router info multicast

router info multicast

Syntax

router info multicast

router info multicast

Syntax