Fortinet Document Library

Version:


Table of Contents

CLI Reference

6.0.6
Download PDF
Copy Link

wireless-controller hotspot20 h2qp-wan-metric

Introduction.

config wireless-controller hotspot20 h2qp-wan-metric
    edit {name}
    # Configure WAN metrics.
        set name {string}   WAN metric name. size[35]
        set link-status {up | down | in-test}   Link status.
                up       Link up.
                down     Link down.
                in-test  Link in test state.
        set symmetric-wan-link {symmetric | asymmetric}   WAN link symmetry.
                symmetric   Symmetric WAN link (uplink and downlink speeds are the same).
                asymmetric  Asymmetric WAN link (uplink and downlink speeds are not the same).
        set link-at-capacity {enable | disable}   Link at capacity.
        set uplink-speed {integer}   Uplink speed (in kilobits/s). range[0-4294967295]
        set downlink-speed {integer}   Downlink speed (in kilobits/s). range[0-4294967295]
        set uplink-load {integer}   Uplink load. range[0-255]
        set downlink-load {integer}   Downlink load. range[0-255]
        set load-measurement-duration {integer}   Load measurement duration (in tenths of a second). range[0-65535]
    next
end

wireless-controller hotspot20 h2qp-wan-metric

Introduction.

config wireless-controller hotspot20 h2qp-wan-metric
    edit {name}
    # Configure WAN metrics.
        set name {string}   WAN metric name. size[35]
        set link-status {up | down | in-test}   Link status.
                up       Link up.
                down     Link down.
                in-test  Link in test state.
        set symmetric-wan-link {symmetric | asymmetric}   WAN link symmetry.
                symmetric   Symmetric WAN link (uplink and downlink speeds are the same).
                asymmetric  Asymmetric WAN link (uplink and downlink speeds are not the same).
        set link-at-capacity {enable | disable}   Link at capacity.
        set uplink-speed {integer}   Uplink speed (in kilobits/s). range[0-4294967295]
        set downlink-speed {integer}   Downlink speed (in kilobits/s). range[0-4294967295]
        set uplink-load {integer}   Uplink load. range[0-255]
        set downlink-load {integer}   Downlink load. range[0-255]
        set load-measurement-duration {integer}   Load measurement duration (in tenths of a second). range[0-65535]
    next
end