Fortinet Document Library

Version:


Table of Contents

CLI Reference

6.0.6
Download PDF
Copy Link

system {ips-urlfilter-dns | ips-urlfilter-dns6}

Use this command to specify IPV4 and IPv6 DNS servers for IPS URL filtering queries. Individual addresses can be enabled/disabled as needed.

note icon Similar entries can be found under both ips-urlfilter-dns and ips-urlfilter-dns6 (except the IPv4 version also includes an IPv6 capability option), so only one CLI syntax is shown.

History

The following table shows all newly added, changed, or removed entries as of FortiOS 6.0.

Command Description

config system ips-urlfilter-dns6

IPv6 DNS queries can be configured as well as IPv4.

config system ips-urlfilter-dns

edit <address>

set ipv6-capability {enable | disable}

next

end

Enable or disable (by default) this server for IPv6 queries.
config system ips-urlfilter-dns
    edit {address}
    # Configure IPS URL filter DNS servers.
        set address {ipv4 address}   DNS server IP address.
        set status {enable | disable}   Enable/disable using this DNS server for IPS URL filter DNS queries.
        set ipv6-capability {enable | disable}   Enable/disable this server for IPv6 queries.
    next
end

system {ips-urlfilter-dns | ips-urlfilter-dns6}

Use this command to specify IPV4 and IPv6 DNS servers for IPS URL filtering queries. Individual addresses can be enabled/disabled as needed.

note icon Similar entries can be found under both ips-urlfilter-dns and ips-urlfilter-dns6 (except the IPv4 version also includes an IPv6 capability option), so only one CLI syntax is shown.

History

The following table shows all newly added, changed, or removed entries as of FortiOS 6.0.

Command Description

config system ips-urlfilter-dns6

IPv6 DNS queries can be configured as well as IPv4.

config system ips-urlfilter-dns

edit <address>

set ipv6-capability {enable | disable}

next

end

Enable or disable (by default) this server for IPv6 queries.
config system ips-urlfilter-dns
    edit {address}
    # Configure IPS URL filter DNS servers.
        set address {ipv4 address}   DNS server IP address.
        set status {enable | disable}   Enable/disable using this DNS server for IPS URL filter DNS queries.
        set ipv6-capability {enable | disable}   Enable/disable this server for IPv6 queries.
    next
end