Fortinet Document Library

Version:


Table of Contents

CLI Reference

6.0.6
Download PDF
Copy Link

system ipv6-tunnel

Use this command to tunnel IPv4 traffic over an IPv6 network. The IPv6 interface is configured under config system interface. All subnets between the source and destination addresses must support IPv6.

tooltip icon This command is not available in Transparent mode
config system ipv6-tunnel
    edit {name}
    # Configure IPv6/IPv4 in IPv6 tunnel.
        set name {string}   IPv6 tunnel name. size[15]
        set source {ipv6 address}   Local IPv6 address of the tunnel.
        set destination {ipv6 address}   Remote IPv6 address of the tunnel.
        set interface {string}   Interface name. size[15] - datasource(s): system.interface.name
        set auto-asic-offload {enable | disable}   Enable/disable tunnel ASIC offloading.
    next
end

system ipv6-tunnel

Use this command to tunnel IPv4 traffic over an IPv6 network. The IPv6 interface is configured under config system interface. All subnets between the source and destination addresses must support IPv6.

tooltip icon This command is not available in Transparent mode
config system ipv6-tunnel
    edit {name}
    # Configure IPv6/IPv4 in IPv6 tunnel.
        set name {string}   IPv6 tunnel name. size[15]
        set source {ipv6 address}   Local IPv6 address of the tunnel.
        set destination {ipv6 address}   Remote IPv6 address of the tunnel.
        set interface {string}   Interface name. size[15] - datasource(s): system.interface.name
        set auto-asic-offload {enable | disable}   Enable/disable tunnel ASIC offloading.
    next
end