SNMP OIDs added for switch statistics and port status 7.0.1
Three SNMP OIDs have been added to the FortiOS enterprise MIB 2 tables. They report the FortiSwitch port status and FortiSwitch CPU and memory statistics.
|
SNMP OID |
Description |
|---|---|
|
fgSwDeviceInfo.fgSwDeviceTable.fgSwDeviceEntry.fgSwDeviceEntry.fgSwCpu 1.3.6.1.4.1.12356.101.24.1.1.1.11 |
Percentage of the CPU being used. |
|
fgSwDeviceInfo.fgSwDeviceTable.fgSwDeviceEntry.fgSwDeviceEntry.fgSwMemory 1.3.6.1.4.1.12356.101.24.1.1.1.12 |
Percentage of memory being used. |
|
fgSwPortInfo.fgSwPortTable.fgSwPortEntry.fgSwPortStatus 1.3.6.1.4.1.12356.101.24.2.1.1.6 |
Whether a managed FortiSwitch port is up or down. |
These OIDs require FortiSwitchOS 7.0.0 or higher. FortiLink and SNMP must be configured on the FortiGate device.
FortiSwitch units update the CPU and memory statistics every 30 seconds. This interval cannot be changed.
FortiOS versions 6.4.2 through 7.0.0 show the port status in the configuration management database (CMDB) for managed ports; FortiOS 7.0.1 and higher show the link status that has been retrieved from the switch port as the port status for managed ports.
Sample queries
To find out how much CPU is being used on a FortiSwitch 1024D with the serial number FS1D243Z17000032:
root@PC05:~# snmpwalk -v2c -Cc -c REGR-SYS 172.16.200.1 1.3.6.1.4.1.12356.101.24.1.1.1.11.2.8.17000032
To find out how much memory is being used on a FortiSwitch 1024D with the serial number FS1D243Z17000032:
root@PC05:~# snmpwalk -v2c -Cc -c REGR-SYS 172.16.200.1 1.3.6.1.4.1.12356.101.24.1.1.1.12.2.8.17000032
To find out the status of port1 of a FortiSwitch 1024D with the serial number FS1D243Z17000032:
root@PC05:~# snmpwalk -v2c -Cc -c REGR-SYS 172.16.200.1 1.3.6.1.4.1.12356.101.24.2.1.1.6.2.8.17000032.1