Fortinet Document Library

Version:

Version:


Table of Contents

Cookbook

Download PDF
Copy Link

Classifying traffic by source interface

In firewall shaping policies, you can classify traffic by source interface with the following command:

config firewall shaping-policy

edit 1

set srcintf <interface_name>

......

next

end

Sample configuration

For this example, there are two shaping policies:

  • Policy 1 is for traffic from the Office to the Server, with the speed limited to 5 MB/s.
  • Policy 2 is for traffic from the Lab to the Server, with the speed limited to 1 MB/s.
To configure the traffic shaping policy:
config firewall shaping-policy
    edit 1
        set name "Office_Speed_5MB"
        set service "ALL"
        set srcintf "port13"
        set dstintf "port9"
        set traffic-shaper "5MB/s"
        set traffic-shaper-reverse "5MB/s"
        set srcaddr "all"
        set dstaddr "all"
    next
    edit 2
        set name "Lab_Speed_1MB"
        set service "ALL"
        set srcintf "port10"
        set dstintf "port9"
        set traffic-shaper "1MB/s"
        set traffic-shaper-reverse "1MB/s"
        set srcaddr "all"
        set dstaddr "all"
    next
end

Classifying traffic by source interface

In firewall shaping policies, you can classify traffic by source interface with the following command:

config firewall shaping-policy

edit 1

set srcintf <interface_name>

......

next

end

Sample configuration

For this example, there are two shaping policies:

  • Policy 1 is for traffic from the Office to the Server, with the speed limited to 5 MB/s.
  • Policy 2 is for traffic from the Lab to the Server, with the speed limited to 1 MB/s.
To configure the traffic shaping policy:
config firewall shaping-policy
    edit 1
        set name "Office_Speed_5MB"
        set service "ALL"
        set srcintf "port13"
        set dstintf "port9"
        set traffic-shaper "5MB/s"
        set traffic-shaper-reverse "5MB/s"
        set srcaddr "all"
        set dstaddr "all"
    next
    edit 2
        set name "Lab_Speed_1MB"
        set service "ALL"
        set srcintf "port10"
        set dstintf "port9"
        set traffic-shaper "1MB/s"
        set traffic-shaper-reverse "1MB/s"
        set srcaddr "all"
        set dstaddr "all"
    next
end