Fortinet Document Library

Version:


Table of Contents

Cookbook

6.2.0
Download PDF
Copy Link

Configuring ports

To improve security, the default ports for administrative connections to the FortiGate can be changed. Port numbers must be unique. If a conflict exists with a particular port, a warning message is shown.

When connecting to the FortiGate after a port has been changed, the port number be included, for example: https://192.168.1.99:100.

To configure the ports in the GUI:
  1. Go to System > Settings.
  2. In the Administration Settings section, set the HTTP, HTTPS, SSH, and Telnet ports.
  3. Enable Redirect to HTTPS to prevent HTTP from being used by administrators.
  4. Click Apply.
To configure the ports in the CLI:
config system global
    set admin-port <port>
    set admin-sport <port>
    set admin-https-redirect {enable | disable}
    set admin-ssh-port <port>
    set admin-telnet-port <port>    
end

Configuring ports

To improve security, the default ports for administrative connections to the FortiGate can be changed. Port numbers must be unique. If a conflict exists with a particular port, a warning message is shown.

When connecting to the FortiGate after a port has been changed, the port number be included, for example: https://192.168.1.99:100.

To configure the ports in the GUI:
  1. Go to System > Settings.
  2. In the Administration Settings section, set the HTTP, HTTPS, SSH, and Telnet ports.
  3. Enable Redirect to HTTPS to prevent HTTP from being used by administrators.
  4. Click Apply.
To configure the ports in the CLI:
config system global
    set admin-port <port>
    set admin-sport <port>
    set admin-https-redirect {enable | disable}
    set admin-ssh-port <port>
    set admin-telnet-port <port>    
end