Fortinet Document Library

Version:

Version:

Version:


Table of Contents

Related Videos

Fortinet Security Fabric 6.0.0 Series - Part 1: Introduction

  • 6,438 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 2: Asset Tagging

  • 1,421 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 3: Compromised Hosts Management

  • 853 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 4: Connectors

  • 1,126 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 5: SSO and Identity Connectors

  • 1,168 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 6: Automation

  • 1,066 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 7: Automation: AWS Lambda and Gener

  • 745 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 8: Security Rating

  • 1,397 views
  • 1 years ago

Cookbook

Download PDF
Copy Link

Configuring the FortiAnalyzer

To use the FortiAnalyzer in the Security Fabric, make sure that the firmware is compatible with the version of FortiOS on the FortiGates. To check for compatibility, see the FortiAnalyzer Release Notes.

  1. To edit the port on FortiAnalyzer that connects to Edge (in the example, port4), go to System Settings > Network and select All Interfaces.

  2. Set IP Address/Netmask to the IP address that you use to configure the Security Fabric settings on Edge (192.168.65.10/255.255.255.0).

  3. Add a Default Gateway, using the IP address of port 16 on Edge.

    Note

    The Default Gateway setting may not appear until you save the settings with the new IP address.

  4. Go to Device Manager. The FortiGate devices are listed as Unregistered.

  5. Select the FortiGate devices, then select +Add.

  6. The FortiGate devices now appear as Registered.

  7. After a moment, a warning icon appears beside Edge because the FortiAnalyzer needs administrative access to the root FortiGate in the Security Fabric.

    Note

    You may need to refresh the page before the icon appears.

  8. Double-click on the FortiGate to enter the Authentication information.

  9. On Edge, go to Security Fabric > Settings. FortiAnalyzer Logging now shows Storage usage information.

Related Videos

Fortinet Security Fabric 6.0.0 Series - Part 1: Introduction

  • 6,438 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 2: Asset Tagging

  • 1,421 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 3: Compromised Hosts Management

  • 853 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 4: Connectors

  • 1,126 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 5: SSO and Identity Connectors

  • 1,168 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 6: Automation

  • 1,066 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 7: Automation: AWS Lambda and Gener

  • 745 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 8: Security Rating

  • 1,397 views
  • 1 years ago

Configuring the FortiAnalyzer

To use the FortiAnalyzer in the Security Fabric, make sure that the firmware is compatible with the version of FortiOS on the FortiGates. To check for compatibility, see the FortiAnalyzer Release Notes.

  1. To edit the port on FortiAnalyzer that connects to Edge (in the example, port4), go to System Settings > Network and select All Interfaces.

  2. Set IP Address/Netmask to the IP address that you use to configure the Security Fabric settings on Edge (192.168.65.10/255.255.255.0).

  3. Add a Default Gateway, using the IP address of port 16 on Edge.

    Note

    The Default Gateway setting may not appear until you save the settings with the new IP address.

  4. Go to Device Manager. The FortiGate devices are listed as Unregistered.

  5. Select the FortiGate devices, then select +Add.

  6. The FortiGate devices now appear as Registered.

  7. After a moment, a warning icon appears beside Edge because the FortiAnalyzer needs administrative access to the root FortiGate in the Security Fabric.

    Note

    You may need to refresh the page before the icon appears.

  8. Double-click on the FortiGate to enter the Authentication information.

  9. On Edge, go to Security Fabric > Settings. FortiAnalyzer Logging now shows Storage usage information.