Configuring the VDOMs
-
Access VDOM-A using the dropdown menu located in the top-left corner.
-
To add a static route, go to Network > Static Routes and select Create New.
-
Set Destination to Subnet and leave the destination IP address set to 0.0.0.0/0.0.0.0.
-
Set Gateway to the IP address provided by your ISP and Interface to the Internet-facing interface.
-
To create a new policy, go to Policy & Objects > IPv4 Policy and select Create New.
-
Set the Incoming Interface to port 1 and set the Outgoing Interface to wan 1.
-
Repeat the above steps to configure VDOM-B.