Fortinet black logo

Cookbook

Checking cluster operation

Copy Link
Copy Doc ID a4a06ec3-12a7-11e9-b86b-00505692583a:631653
Download PDF

Checking cluster operation

Check the cluster synchronization status to make sure the primary and backup FortiGates both have the same configuration.

  1. Log into the primary FortiGate CLI and enter this command:
  2. diagnose sys ha checksum cluster

    The command output lists all cluster members' configuration checksums. If they all have identical checksums, you can be sure that the configurations are synchronized. If the checksums are different, wait a short while and enter the command again. Repeat until the checksums are identical. It may take a while for some parts of the configuration to be synchronized.

    If the checksums never become identical visit the Fortinet Support website for assistance.

  3. The HA Status dashboard widget also shows synchronization status. Mouse over the host names of each FortiGate in the widget to verify that they are synchronized and both have the same checksum.
  4. To view more information about the cluster status, click on the HA Status widget and select Configure Settings in System > HA (or go to System > HA).

Checking cluster operation

Check the cluster synchronization status to make sure the primary and backup FortiGates both have the same configuration.

  1. Log into the primary FortiGate CLI and enter this command:
  2. diagnose sys ha checksum cluster

    The command output lists all cluster members' configuration checksums. If they all have identical checksums, you can be sure that the configurations are synchronized. If the checksums are different, wait a short while and enter the command again. Repeat until the checksums are identical. It may take a while for some parts of the configuration to be synchronized.

    If the checksums never become identical visit the Fortinet Support website for assistance.

  3. The HA Status dashboard widget also shows synchronization status. Mouse over the host names of each FortiGate in the widget to verify that they are synchronized and both have the same checksum.
  4. To view more information about the cluster status, click on the HA Status widget and select Configure Settings in System > HA (or go to System > HA).