Fortinet Document Library

Version:

6.2.7
6.2.6
6.2.5

Version:

6.2.4
6.2.3
6.2.2

Version:

6.2.0
6.0.0
5.6.0

Version:

5.4.0

Table of Contents

Home FortiGate / FortiOS 6.0.0 Cookbook

Cookbook

6.0.0
6.2.7
6.2.6
6.2.5
6.2.4
6.2.3
6.2.2
6.2.0
6.0.0
5.6.0
5.4.0
Download PDF
Copy Link

Configuring tunnel interfaces

  1. To configure Edge to listen for FortiTelemetry traffic over the VPN, connect to Edge, go to Network > Interfaces, and edit the tunnel interface.
  2. Set IP to the local IP address for this interface (10.10.10.1) and Remote IP/Network mask to the IP address for the Branch tunnel interface (10.10.10.2/32).
  3. Under Administrative Access, enable FortiTelemetry.

  4. Connect to Branch, go to Network > Interfaces, and edit the tunnel interface.
  5. Set IP to the local IP address for this interface (10.10.10.2) and Remote IP/Network mask to the IP address for the Edge tunnel interface (10.10.10.1/32).

Configuring tunnel interfaces

  1. To configure Edge to listen for FortiTelemetry traffic over the VPN, connect to Edge, go to Network > Interfaces, and edit the tunnel interface.
  2. Set IP to the local IP address for this interface (10.10.10.1) and Remote IP/Network mask to the IP address for the Branch tunnel interface (10.10.10.2/32).
  3. Under Administrative Access, enable FortiTelemetry.

  4. Connect to Branch, go to Network > Interfaces, and edit the tunnel interface.
  5. Set IP to the local IP address for this interface (10.10.10.2) and Remote IP/Network mask to the IP address for the Edge tunnel interface (10.10.10.1/32).