Fortinet black logo

Version:

6.2.15
6.2.14
6.2.13

Version:

6.2.12
6.2.11
6.2.10

Version:

6.2.9
6.2.8
6.2.7

Version:

6.2.6
6.2.5
6.2.4

Version:

6.2.3
6.2.2
6.2.0

Version:

6.0.0
5.6.0
5.4.0

Table of Contents

Cookbook

6.0.0
6.2.15
6.2.14
6.2.13
6.2.12
6.2.11
6.2.10
6.2.9
6.2.8
6.2.7
6.2.6
6.2.5
6.2.4
6.2.3
6.2.2
6.2.0
6.0.0
5.6.0
5.4.0
Download PDF
Copy Doc ID a4a06ec3-12a7-11e9-b86b-00505692583a:411062
Copy Link

Configuring FortiClient

  1. To add the VPN connection, open FortiClient, go to Remote Access and click Add a new connection.
  2. Set the VPN to IPsec VPN and Remote Gateway to the FortiGate IP address.
  3. Set Authentication Method to Pre-Shared Key and enter the key below.

  4. Expand Advanced Settings > Phase 1 and in the Local ID field, enter dialup1.
  5. Configure remaining settings as needed, then click Save.
Previous
Next

Configuring FortiClient

  1. To add the VPN connection, open FortiClient, go to Remote Access and click Add a new connection.
  2. Set the VPN to IPsec VPN and Remote Gateway to the FortiGate IP address.
  3. Set Authentication Method to Pre-Shared Key and enter the key below.

  4. Expand Advanced Settings > Phase 1 and in the Local ID field, enter dialup1.
  5. Configure remaining settings as needed, then click Save.
Previous
Next