Fortinet Document Library

Version:

Version:

Version:


Table of Contents

Related Videos

Fortinet Security Fabric 6.0.0 Series - Part 4: Connectors

  • 1,126 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 5: SSO and Identity Connectors

  • 1,166 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 7: Automation: AWS Lambda and Gener

  • 744 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 8: Security Rating

  • 1,395 views
  • 1 years ago

Cookbook

Download PDF
Copy Link

Installing Sales

  1. To edit the interface on Marketing that connects to Sales (in the example, port12), go to Network > Interfaces.

  2. Set an IP/Network Mask for the interface (in the example, 192.168.135.2/255.255.255.0).

  3. Set Administrative Access to allow FortiTelemetry.

  4. To create a policy for traffic from Sales to Edge, go to Policy & Objects > IPv4 Policy.

  5. Enable NAT.

  6. To edit wan2 on Sales, go to Network > Interfaces.

  7. Set an IP/Network Mask for the interface that’s on the same subnet as the internal 14 interface on Marketing (in the example, 192.168.135.10/255.255.255.0).

  8. Under Administrative Access, select HTTPS and SSH.

  9. Edit the lan interface.

  10. Set Addressing Mode to Manual, and set the IP/Network Mask to a private IP address (in the example, 10.10.135.1/255.255.255.0).

  11. Set Administrative Access to allow FortiTelemetry.

  12. If you require the FortiGate to provide IP addresses, using DHCP, to devices that connect to this interface, enable DHCP Server.

  13. Under Networked Devices, enable Device Detection.

  14. To add a default route, go to Network > Static Routes and select Create New. Set Gateway to the IP address of the internal 14 interface on Marketing.

  15. To create a policy that allow users on the Sales network to access Marketing, go to Policy & Objects > IPv4 Policy.

  16. To add Sales to the Security Fabric, go to Security Fabric > Settings. Enable FortiGate Telemetry, then enter the same Group name and Group password that you set previously..

  17. Enable Connect to upstream FortiGate and enter the IP address of the internal 14 interface on Marketing.

  18. FortiAnalyzer Logging is enabled by default. Settings for the FortiAnalyzer are retrieved when Sales connects to Edge.

     

  19. Connect WAN 2 on Sales to internal 14 on Marketing.

  20. If you’re using FortiOS 6.0.3 and later, connect to Edge and go to Security Fabric > Settings. Authorize Sales to join the Security Fabric.

Related Videos

Fortinet Security Fabric 6.0.0 Series - Part 4: Connectors

  • 1,126 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 5: SSO and Identity Connectors

  • 1,166 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 7: Automation: AWS Lambda and Gener

  • 744 views
  • 1 years ago

Fortinet Security Fabric 6.0.0 Series - Part 8: Security Rating

  • 1,395 views
  • 1 years ago

Installing Sales

  1. To edit the interface on Marketing that connects to Sales (in the example, port12), go to Network > Interfaces.

  2. Set an IP/Network Mask for the interface (in the example, 192.168.135.2/255.255.255.0).

  3. Set Administrative Access to allow FortiTelemetry.

  4. To create a policy for traffic from Sales to Edge, go to Policy & Objects > IPv4 Policy.

  5. Enable NAT.

  6. To edit wan2 on Sales, go to Network > Interfaces.

  7. Set an IP/Network Mask for the interface that’s on the same subnet as the internal 14 interface on Marketing (in the example, 192.168.135.10/255.255.255.0).

  8. Under Administrative Access, select HTTPS and SSH.

  9. Edit the lan interface.

  10. Set Addressing Mode to Manual, and set the IP/Network Mask to a private IP address (in the example, 10.10.135.1/255.255.255.0).

  11. Set Administrative Access to allow FortiTelemetry.

  12. If you require the FortiGate to provide IP addresses, using DHCP, to devices that connect to this interface, enable DHCP Server.

  13. Under Networked Devices, enable Device Detection.

  14. To add a default route, go to Network > Static Routes and select Create New. Set Gateway to the IP address of the internal 14 interface on Marketing.

  15. To create a policy that allow users on the Sales network to access Marketing, go to Policy & Objects > IPv4 Policy.

  16. To add Sales to the Security Fabric, go to Security Fabric > Settings. Enable FortiGate Telemetry, then enter the same Group name and Group password that you set previously..

  17. Enable Connect to upstream FortiGate and enter the IP address of the internal 14 interface on Marketing.

  18. FortiAnalyzer Logging is enabled by default. Settings for the FortiAnalyzer are retrieved when Sales connects to Edge.

     

  19. Connect WAN 2 on Sales to internal 14 on Marketing.

  20. If you’re using FortiOS 6.0.3 and later, connect to Edge and go to Security Fabric > Settings. Authorize Sales to join the Security Fabric.