Fortinet white logo
Fortinet white logo

Administration Guide

Icons

Icons

Icons in FortiNAC represent different devices and users as they connect to and access the network. Host Icons are displayed in the Host View and the Inventory on the Ports tab. System Icons are displayed in the Inventory. Device Icons are displayed either in Hosts View, Profiled Devices, dashboard or Inventory depending on where they are being managed. Host Icons in particular have many states.

Icons in FortiNAC represent different devices and users as they connect to and access the network. Host Icons are displayed in the Hosts View. Device Icons are displayed either in Hosts View or the Device Summary Panel on the dashboard. Host Icons in particular have many states.

To indicate the state of a user, a device or a host, the icons are modified slightly by superimposing an image on top, such as a red box to indicate that the item has been disabled. States can be cumulative. For example, you could see an "X" over a host icon. This indicates that the host has been disabled but is still online. The table below provides a legend for those states.

Icon state

State

Definition

State

Definition

Hosts, adapters or users view

Online / Enabled: No image over icon indicates that the item, such as a Host or Adapter is online.

Offline / Enabled: Icon pixelated indicates that the item, such as a Host or Adapter is offline.

Online / Disabled: Host or User was disabled but is online. This could be due to a misconfiguration of a switch or port or because the host was online at the time it was disabled. Defined as a Violation in some summary windows.

Offline / Disabled: Host or User is disabled and is not online.

Go To: Allows you to select an icon on the user, host or Adapter View and navigate to corresponding information on another view. For example, if you have a host selected on the Host View, and you click the Go To on the Adapter icon, the Adapter View is displayed with the appropriate adapter selected.

Offline Device: A device being managed through the Host View is not connected to the network, such as a gaming device or an IP phone.

Not Authenticated: Located at the upper-left corner of the icon. User has not yet authenticated. There is a delay between when the user's computer is connected to the network and when it is placed in the authentication VLAN.

Security Risk: Located at the upper-right corner of the icon. Host has been moved to remediation.

Pending At Risk: Located at the upper-right corner of the icon. Host has failed a scan that is set to delayed remediation for x number of days. Icon indicates that the host has not yet been marked "at risk" but will be after the delay set in the scan has elapsed.

Inventory

No image over icon=Contact Established

Device Contact Unknown. Indicates that FortiNAC has not made initial contact with the device. Upon initial contact, FortiNAC queries the device and verifies the device type.

Device Contact Lost

Wireless switch

Blue: Initial contact has not been made

Red: Contact Lost

Gray: Contact Established

Container

Blue: Initial contact has not been made with one or more devices in the container

Red: Contact lost with one or more devices in the container

Gray: Contact established with all devices in the container

Port

Admin status is on and Link status is up, indicating Host or device connected

Admin status is on and Link status is down, indicating that nothing is connected

Admin status is Off.

The icons shown in the table below represent hosts, users and devices that are either online or in a good state, such as hosts that are Safe.

Icon list

Icon

Definition

Icon

Definition

Adapter, host and user icons

Adapter

Rogue Host

Registered Host

IP Phone

Contractor

Guest

User

Administrator

System icons

Container

Multi Access Point
(multiple hosts connected to one port, and none of the ports are phones)

New Registered Host/Phone (one registered host and one phone are connected to a port)

New Rogue Host/Phone (one rogue host and one phone are connected to a port)

New Cloud/Phone Icon

Used when one of the following is true:

More than one phone and one registered host connected to a port

More than one registered host and one phone connected to a port

More than one registered host and more than one phones connected to a port

Wired Port

Link to a neighboring device

Process Plug-In

Port Aggregate Uplink

SSID: Wireless Connection

Directory

Process

Device icons

Alarm System

Android

Apple Device

Camera

Card Reader

Cash Register

Dialup Server

Environmental

Firewall

Gaming Device

Generic Monitoring System

Health Care Device

Hub

Internet TV

IP Phone

IPS/IDS

Linux

macOS

Mobile or Apple iOS or Android

Generic Network Device

PBX

Pingable Device

Printer

Router

Server

Switch

Unknown Device

Unix

UPS

Vending Machine

VPN Connection

Windows

Wireless Switch

Icons

Icons

Icons in FortiNAC represent different devices and users as they connect to and access the network. Host Icons are displayed in the Host View and the Inventory on the Ports tab. System Icons are displayed in the Inventory. Device Icons are displayed either in Hosts View, Profiled Devices, dashboard or Inventory depending on where they are being managed. Host Icons in particular have many states.

Icons in FortiNAC represent different devices and users as they connect to and access the network. Host Icons are displayed in the Hosts View. Device Icons are displayed either in Hosts View or the Device Summary Panel on the dashboard. Host Icons in particular have many states.

To indicate the state of a user, a device or a host, the icons are modified slightly by superimposing an image on top, such as a red box to indicate that the item has been disabled. States can be cumulative. For example, you could see an "X" over a host icon. This indicates that the host has been disabled but is still online. The table below provides a legend for those states.

Icon state

State

Definition

State

Definition

Hosts, adapters or users view

Online / Enabled: No image over icon indicates that the item, such as a Host or Adapter is online.

Offline / Enabled: Icon pixelated indicates that the item, such as a Host or Adapter is offline.

Online / Disabled: Host or User was disabled but is online. This could be due to a misconfiguration of a switch or port or because the host was online at the time it was disabled. Defined as a Violation in some summary windows.

Offline / Disabled: Host or User is disabled and is not online.

Go To: Allows you to select an icon on the user, host or Adapter View and navigate to corresponding information on another view. For example, if you have a host selected on the Host View, and you click the Go To on the Adapter icon, the Adapter View is displayed with the appropriate adapter selected.

Offline Device: A device being managed through the Host View is not connected to the network, such as a gaming device or an IP phone.

Not Authenticated: Located at the upper-left corner of the icon. User has not yet authenticated. There is a delay between when the user's computer is connected to the network and when it is placed in the authentication VLAN.

Security Risk: Located at the upper-right corner of the icon. Host has been moved to remediation.

Pending At Risk: Located at the upper-right corner of the icon. Host has failed a scan that is set to delayed remediation for x number of days. Icon indicates that the host has not yet been marked "at risk" but will be after the delay set in the scan has elapsed.

Inventory

No image over icon=Contact Established

Device Contact Unknown. Indicates that FortiNAC has not made initial contact with the device. Upon initial contact, FortiNAC queries the device and verifies the device type.

Device Contact Lost

Wireless switch

Blue: Initial contact has not been made

Red: Contact Lost

Gray: Contact Established

Container

Blue: Initial contact has not been made with one or more devices in the container

Red: Contact lost with one or more devices in the container

Gray: Contact established with all devices in the container

Port

Admin status is on and Link status is up, indicating Host or device connected

Admin status is on and Link status is down, indicating that nothing is connected

Admin status is Off.

The icons shown in the table below represent hosts, users and devices that are either online or in a good state, such as hosts that are Safe.

Icon list

Icon

Definition

Icon

Definition

Adapter, host and user icons

Adapter

Rogue Host

Registered Host

IP Phone

Contractor

Guest

User

Administrator

System icons

Container

Multi Access Point
(multiple hosts connected to one port, and none of the ports are phones)

New Registered Host/Phone (one registered host and one phone are connected to a port)

New Rogue Host/Phone (one rogue host and one phone are connected to a port)

New Cloud/Phone Icon

Used when one of the following is true:

More than one phone and one registered host connected to a port

More than one registered host and one phone connected to a port

More than one registered host and more than one phones connected to a port

Wired Port

Link to a neighboring device

Process Plug-In

Port Aggregate Uplink

SSID: Wireless Connection

Directory

Process

Device icons

Alarm System

Android

Apple Device

Camera

Card Reader

Cash Register

Dialup Server

Environmental

Firewall

Gaming Device

Generic Monitoring System

Health Care Device

Hub

Internet TV

IP Phone

IPS/IDS

Linux

macOS

Mobile or Apple iOS or Android

Generic Network Device

PBX

Pingable Device

Printer

Router

Server

Switch

Unknown Device

Unix

UPS

Vending Machine

VPN Connection

Windows

Wireless Switch