Configuring HTTP or HTTPS protocol support

For a successful auto provisioning to occur across multiple subnets, the HTTP or HTTPS protocols must be enabled on the FortiVoice network interface.

1. Go to System > Network > Network.
2. Select the network interface in use (in this example, port1) and select Edit.
3. Expand Advanced Setting.
4. Under Access, make sure HTTP and/or HTTPS is enabled, then select OK.



5. Go to System > Advanced > Auto Provisioning.
6. Under Auto Provisioning, select Enabled (and optionally enable Unassigned phone).
7. Set Provisioning protocol to either HTTPS or HTTP, and select Apply.