Version:

Version:

Version:

Version:

Version:


Table of Contents

FortiVoice Cookbook

Configuring HTTP or HTTPS protocol support

For a successful auto provisioning to occur across multiple subnets, the HTTP or HTTPS protocols must be enabled on the FortiVoice network interface.

  1. Go to System > Network > Network.
  2. Select the network interface in use (in this example, port1) and select Edit.
  3. Expand Advanced Setting.
  4. Under Access, make sure HTTP and/or HTTPS is enabled, then select OK.
  5. Go to System > Advanced > Auto Provisioning.
  6. Under Auto Provisioning, select Enabled (and optionally enable Unassigned phone).
  7. Set Provisioning protocol to either HTTPS or HTTP, and select Apply.

Configuring HTTP or HTTPS protocol support

For a successful auto provisioning to occur across multiple subnets, the HTTP or HTTPS protocols must be enabled on the FortiVoice network interface.

  1. Go to System > Network > Network.
  2. Select the network interface in use (in this example, port1) and select Edit.
  3. Expand Advanced Setting.
  4. Under Access, make sure HTTP and/or HTTPS is enabled, then select OK.
  5. Go to System > Advanced > Auto Provisioning.
  6. Under Auto Provisioning, select Enabled (and optionally enable Unassigned phone).
  7. Set Provisioning protocol to either HTTPS or HTTP, and select Apply.