Fortinet Document Library

Version:

Version:

Version:


Table of Contents

Cookbook

Download PDF
Copy Link

Creating the FortiAP interfaces

  1. Go to Network > Interfaces and create an internal FortiAP interface.

    Set Addressing mode to Manual and set an IP/Network Mask.

    Under Administrative Access, enable CAPWAP.

    Enable DHCP Server. The Starting IP and End IP address range should automatically populate.

    Enable Device Detection and select OK.

Creating the FortiAP interfaces

  1. Go to Network > Interfaces and create an internal FortiAP interface.

    Set Addressing mode to Manual and set an IP/Network Mask.

    Under Administrative Access, enable CAPWAP.

    Enable DHCP Server. The Starting IP and End IP address range should automatically populate.

    Enable Device Detection and select OK.