Fortinet Document Library

Version:

Version:

Version:


Table of Contents

Cookbook

Download PDF
Copy Link

Configuring the third FortiGate (Peer-3)

  1. Configure Peer-3 with the same configuration as Peer-1:
    1. Enable virtual domain configuration, add vdom1, set vdom1 to proxy mode, and add port 1 and port 2 to vdom1.
    2. Create a virtual wire pair between port 1 and port 2.
    3. Create a virtual wire pair policy to allow all traffic between port 1 and port 2. This example policy applies antivirus scanning, application control, and VoIP profiles.
  2. Configure Peer-3 for FGSP.

    config system cluster-sync

    edit 1

    set peerip 10.10.10.1

    set peervd root

    set syncvd vdom1

    next

    edit 2

    set peerip 10.10.10.2

    set peervd root

    set syncvd vdom1

    next

    edit 3

    set peerip 10.10.10.4

    set peervd root

    set syncvd vdom1

    end

Configuring the third FortiGate (Peer-3)

  1. Configure Peer-3 with the same configuration as Peer-1:
    1. Enable virtual domain configuration, add vdom1, set vdom1 to proxy mode, and add port 1 and port 2 to vdom1.
    2. Create a virtual wire pair between port 1 and port 2.
    3. Create a virtual wire pair policy to allow all traffic between port 1 and port 2. This example policy applies antivirus scanning, application control, and VoIP profiles.
  2. Configure Peer-3 for FGSP.

    config system cluster-sync

    edit 1

    set peerip 10.10.10.1

    set peervd root

    set syncvd vdom1

    next

    edit 2

    set peerip 10.10.10.2

    set peervd root

    set syncvd vdom1

    next

    edit 3

    set peerip 10.10.10.4

    set peervd root

    set syncvd vdom1

    end