Fortinet Document Library

Version:

Version:

Version:


Table of Contents

Cookbook

Download PDF
Copy Link

Allowing traffic from the internal network to the SD-WAN interface

  1. Go to Policy & Objects > IPv4 Policy and create a new policy.
  2. Set Incoming Interface to your internal network’s interface and set Outgoing Interface to the SD-WAN interface.
  3. Enable NAT and apply Security Profiles as required.
  4. Enable Log Allowed Traffic for All Sessions to allow you to verify the results later.

If you had redirected or deleted any policies, you can redirect them to the SD-WAN interface or recreate those policies.

Allowing traffic from the internal network to the SD-WAN interface

  1. Go to Policy & Objects > IPv4 Policy and create a new policy.
  2. Set Incoming Interface to your internal network’s interface and set Outgoing Interface to the SD-WAN interface.
  3. Enable NAT and apply Security Profiles as required.
  4. Enable Log Allowed Traffic for All Sessions to allow you to verify the results later.

If you had redirected or deleted any policies, you can redirect them to the SD-WAN interface or recreate those policies.