Clients Monitor
The Clients Monitor displays detailed information about connected clients and the health of individual WiFi connections .
To view the Clients Monitor:
- Go to AP Manager.
- In the tree menu, go to Device & Groups > Managed FortiGate (#), and select a managed device. Alternatively, you can select a device in a group, see FortiAP groups.
- In the toolbar, click More > View Clients, or right-click and select View Clients.
- (Optional) In the toolbar, enter a search term in the Search field to locate a specific device.
- (Optional) In the toolbar, click Column Settings to add and remove columns, or reset to default.
The following columns are available:
SSID
The SSID that the client connected to.
FortiAP
The serial number of the FortiAP unit that the client connected to.
IP
The IP address assigned to the wireless client.
Device
The type of device that the client is using.
Channel
The wireless radio channel that is used.
Bandwidth TX/RX
Client received and transmitted bandwidth, in Kbps.
Signal Strength/Noise
The signal-to-noise ratio in dBs calculated from signal strength and noise level.
Signal Strength
The relative signal strength of the AP.
Association Time
How long the client has been connected to this access point.
Authentication
The type of authentication used.
Bandwidth RX
Client received bandwidth, in Kbps.
Bandwidth TX
Client transmitted bandwidth, in Kbps.
Device OS
The OS version on the FortiAP.
Host Information
The host name of the WiFi client, if available.
Idle Time
The amount of time that the client has been idle.
Manufacturer
The manufacturer of the client device.
Rate
The connection rate between the WiFi client and the AP.
Name
The name of the FortiGate device that the FortiAP is attached to.