Fortinet black logo

Administration Guide

SD-WAN rules

SD-WAN rules

Configure SD-WAN rules for WAN links by specifying the required network parameters.

To create a new SD-WAN rule:
  1. Go to the device database. See Displaying the device database.
  2. In the device database, go to System > SD-WAN.

    The SD-WAN pane opens.

  3. In the SD-WAN Rules section, click Create New.

    The Create New SD-WAN Rule dialog-box opens.

  4. Configure the options, and click OK to create the new SD-WAN rule.
    Note

    Starting in FortiManager 7.2.0, you can configure application categories as a destination. The application category field uses the default internet service database (ISDB) categories received from FortiGuard. For more information about the options, see SD-WAN rules.

  5. Click Apply to save the SD-WAN settings.

SD-WAN rules

Configure SD-WAN rules for WAN links by specifying the required network parameters.

To create a new SD-WAN rule:
  1. Go to the device database. See Displaying the device database.
  2. In the device database, go to System > SD-WAN.

    The SD-WAN pane opens.

  3. In the SD-WAN Rules section, click Create New.

    The Create New SD-WAN Rule dialog-box opens.

  4. Configure the options, and click OK to create the new SD-WAN rule.
    Note

    Starting in FortiManager 7.2.0, you can configure application categories as a destination. The application category field uses the default internet service database (ISDB) categories received from FortiGuard. For more information about the options, see SD-WAN rules.

  5. Click Apply to save the SD-WAN settings.