Fortinet black logo

Administration Guide

ICAP load balancing

ICAP load balancing

Note

Before you can configure an ICAP load balancing, it must be enabled in Policy and Object's Display Options.

Content analysis objects are only available in FortiProxy ADOMs. See FortiProxy ADOMs.

To create an ICAP load balancing object:
  1. Go to Policy & Objects > Object Configurations > Content Analysis > ICAP Load Balancing, and click Create New.
    The Create New ICAP Load Balancing window appears.
  2. Enter the following information:

    Name

    Enter a name for the ICAP load balancer.

    Method

    Select the load balancing method from Weighted, Least Session, or Active Passive.

    Remote Server

    Click to add a remote server. You can select a remote server from the dropdown menu and then apply weighting to the selected servers.

ICAP load balancing

Note

Before you can configure an ICAP load balancing, it must be enabled in Policy and Object's Display Options.

Content analysis objects are only available in FortiProxy ADOMs. See FortiProxy ADOMs.

To create an ICAP load balancing object:
  1. Go to Policy & Objects > Object Configurations > Content Analysis > ICAP Load Balancing, and click Create New.
    The Create New ICAP Load Balancing window appears.
  2. Enter the following information:

    Name

    Enter a name for the ICAP load balancer.

    Method

    Select the load balancing method from Weighted, Least Session, or Active Passive.

    Remote Server

    Click to add a remote server. You can select a remote server from the dropdown menu and then apply weighting to the selected servers.