Version:


Table of Contents

SD-WAN Orchestrator 7.0.0.r2 Administration Guide

7.0.0
Download PDF
Copy Link

Creating profiles for HA devices

Before you create a profile, you should create all of the needed shared resources, so you can select them in the profile. See Shared resources.

Among other settings, use the profile to define high availability (HA) interfaces for devices. Once a profile refers to one or more devices, you cannot change HA interfaces in the profile.

To create profiles for HA devices:
  1. Go to Configuration > Profile.
  2. In the toolbar, click +Create New.

    The settings on the General tab are displayed.

  3. Complete the settings on the General tab, and click OK.

    The profile is created, and the System tab opens.

  4. Click the Network tab.

    The Network settings are displayed.

  5. Configure options as needed.
  6. Expand the HA Interfaces section at the bottom, and set the options.

    For a description of the options on the Network tab, see HA Interfaces.

  7. Configure the options on the System and Business tabs as desired.

    For a description of the options on the System and Business tabs, see Profile options described.

  8. Click OK.

Creating profiles for HA devices

Before you create a profile, you should create all of the needed shared resources, so you can select them in the profile. See Shared resources.

Among other settings, use the profile to define high availability (HA) interfaces for devices. Once a profile refers to one or more devices, you cannot change HA interfaces in the profile.

To create profiles for HA devices:
  1. Go to Configuration > Profile.
  2. In the toolbar, click +Create New.

    The settings on the General tab are displayed.

  3. Complete the settings on the General tab, and click OK.

    The profile is created, and the System tab opens.

  4. Click the Network tab.

    The Network settings are displayed.

  5. Configure options as needed.
  6. Expand the HA Interfaces section at the bottom, and set the options.

    For a description of the options on the Network tab, see HA Interfaces.

  7. Configure the options on the System and Business tabs as desired.

    For a description of the options on the System and Business tabs, see Profile options described.

  8. Click OK.