Version:


Table of Contents

SD-WAN Orchestrator 7.0.0.r2 Administration Guide

7.0.0
Download PDF
Copy Link

Adding VDOMs

You can use VDOMs for primary or secondary hub devices as well as edge devices.

Before using this method to add VDOMs to SD-WAN Orchestrator MEA, you must:

  • Create VDOMs on the FortiGate device

    This method adds the VDOM to SD-WAN Orchestrator MEA, so you must create the VDOM first.

  • Configure interfaces for the VDOM by using FortiManager

    This method retrieves interfaces for the VDOM from FortiManager, so you must configure them first.

After you add the VDOM to SD-WAN Orchestrator MEA and retrieve VDOM interfaces, overrides are automatically enabled in the assigned profile for WAN and LAN settings.

To add a VDOM:
  1. Ensure that you have created a profile for a VDOM. See Creating profiles for VDOMs.
  2. Go to Configuration > Device.
  3. In the toolbar, click + Device.

    The Device dialog box opens.

  4. On the General tab, configure the following settings:

    The following table identifies settings that are specific to adding a VDOM. You can set the remaining settings as desired.

    Option

    Description

    Device Name

    Select the device VDOM.

    Profile Name

    Select a profile that is configured for VDOMs.

  5. Click OK.

    The VDOM is added to the device list.

  6. For the VDOM in the device list, click the Update button.

    The settings for the VDOM open for editing, and the General tab is displayed.

  7. Go to the Network tab, and click Retrieve VDOM Interfaces.

    A warning message is displayed.

  8. Click Yes to proceed.

    Interfaces are retrieved, and the Override option is automatically toggled on for LAN and WAN ports in the associated profile.

  9. On the Success message dialog box, click the X to close it.

Adding VDOMs

You can use VDOMs for primary or secondary hub devices as well as edge devices.

Before using this method to add VDOMs to SD-WAN Orchestrator MEA, you must:

  • Create VDOMs on the FortiGate device

    This method adds the VDOM to SD-WAN Orchestrator MEA, so you must create the VDOM first.

  • Configure interfaces for the VDOM by using FortiManager

    This method retrieves interfaces for the VDOM from FortiManager, so you must configure them first.

After you add the VDOM to SD-WAN Orchestrator MEA and retrieve VDOM interfaces, overrides are automatically enabled in the assigned profile for WAN and LAN settings.

To add a VDOM:
  1. Ensure that you have created a profile for a VDOM. See Creating profiles for VDOMs.
  2. Go to Configuration > Device.
  3. In the toolbar, click + Device.

    The Device dialog box opens.

  4. On the General tab, configure the following settings:

    The following table identifies settings that are specific to adding a VDOM. You can set the remaining settings as desired.

    Option

    Description

    Device Name

    Select the device VDOM.

    Profile Name

    Select a profile that is configured for VDOMs.

  5. Click OK.

    The VDOM is added to the device list.

  6. For the VDOM in the device list, click the Update button.

    The settings for the VDOM open for editing, and the General tab is displayed.

  7. Go to the Network tab, and click Retrieve VDOM Interfaces.

    A warning message is displayed.

  8. Click Yes to proceed.

    Interfaces are retrieved, and the Override option is automatically toggled on for LAN and WAN ports in the associated profile.

  9. On the Success message dialog box, click the X to close it.