Version:


Table of Contents

SD-WAN Orchestrator 7.0.0.r2 Administration Guide

7.0.0
Download PDF
Copy Link

Adding SLA servers

You must create an SLA server before you can add it to SD-WAN Orchestrator MEA.

To add SLA servers:
  1. Go to Configuration > Shared Resources > SLA > SLA Server.
  2. In the toolbar, click Create New.
  3. Configure the SLA server settings, and click OK.

    Option

    Description

    Name Enter a name for the SLA server.
    Protocol From the dropdown select the detection method (Ping or HTTP).
    Servers Type the IP address or FQDN of the SLA server to probe.

Adding SLA servers

You must create an SLA server before you can add it to SD-WAN Orchestrator MEA.

To add SLA servers:
  1. Go to Configuration > Shared Resources > SLA > SLA Server.
  2. In the toolbar, click Create New.
  3. Configure the SLA server settings, and click OK.

    Option

    Description

    Name Enter a name for the SLA server.
    Protocol From the dropdown select the detection method (Ping or HTTP).
    Servers Type the IP address or FQDN of the SLA server to probe.