FortiGuard DLP service

The FortiGuard DLP service offers a database of predefined DLP patterns such as data types, dictionaries, and sensors. Example include:

• Drivers licenses for various countries, various states in the USA, and various provinces in Canada
• Tax numbers for various countries
• Credit card numbers
• Bank statements

When enabled, the DLP database (DLDB) is downloaded to the FortiGate and its predefined patterns can be configured in DLP profiles.

To configure DLP database updates:

config system fortiguard
    set update-dldb {enable | disable}
end

To verify the database signature status:

# diagnose autoupdate versions
...
DLP Signature
---------
Version: 1.00010 signed
Contract Expiry Date: n/a
Last Updated using manual update on Fri Jan 27 15:25:00 2023
Last Update Attempt: Mon Jan 30 15:18:39 2023
Result: No Updates

Example

In this example, the administrator wants to look for data leakage of Canadian social insurance number (SIN) information and block this traffic. A DLP profile is created that uses the predefined dictionary, fg-can-natl_id-sin-dict, to check for Canadian Social Insurance Numbers (SINs).

To verify that the Canadian SIN data type is added to the list of predefined data types:

show dlp data-type
config dlp data-type
    ...
    edit "fg-can-natl_id-proximity"                            
        set pattern "fortiguard dlp signature"
    next
end

To configure the DLP profile in the GUI:

1. Configure the DLP sensor using the predefined dictionary from FortiGuard:

   1. Go to Security Profiles > Data Loss Prevention, select the Sensors tab, and click Create New.

   2. Enter a name (sin).

   3. In the Sensor Entries section, click Create New.

   4. Set the Dictionary to fg-can-natl_id-sin-dict and click OK.

      

   5. Click OK to save the sensor.

2. Configure the DLP profile:

   1. Go to Security Profiles > Data Loss Prevention, select the Profiles tab, and click Create New.

   2. Enter a name (test).

   3. In the Rules section, click Create New.

   4. Configure the following settings:

      Name	test
      Sensors	sin
      Severity	Medium
      Action	Block
      Type	File
      File type	all_executables
      Protocol	SMTP, POP3, IMAP, HTTP-GET, HTTP-POST, FTP

      

   5. Click OK.

   6. Click OK to save the profile.

To configure the DLP profile in the CLI:

1. Configure the DLP sensor using the predefined dictionary from FortiGuard:

   config dlp sensor
       edit "sin"
           config entries
               edit 1
                   set dictionary "fg-can-natl_id-sin-dict"
               next
           end
       next
   end

2. Configure the DLP profile:

   config dlp profile
       edit "test"
           set feature-set proxy
           config rule
               edit 1
                   set name "test"
                   set proto smtp pop3 imap http-get http-post ftp
                   set filter-by sensor
                   set file-type 2
                   set sensor "sin"
                   set action block
               next
           end
       next
   end