Websense Integrated Services Protocol

Websense Integrated Services Protocol (WISP) servers can be used server, which allows the FortiGate to send traffic to the third-party web filtering service for rating and approval checking.

When WISP is enabled, the FortiGate maintains a pool of TCP connections to the WISP server. The TCP connections are used to forward HTTP request information and log information to the WISP server and receive policy decisions.

When a WISP server is used in a web filter profile, in flow or proxy mode, the following web filter scanning priority sequence is used:

1. Local URL filter

2. Websense web filtering service

3. FortiGuard web filtering service

The following example uses a WISP server configured in a flow mode web filter profile.

To use a WISP server in flow mode:

1. Configure the WISP servers:

   config web-proxy wisp
       edit "wisp1"
           set server-ip 10.2.3.4
       next
       edit "wisp2"
           set server-ip 10.2.3.5
       next
       edit "wisp3"
           set server-ip 192.168.1.2
       next
       edit "wisp4"
           set server-ip 192.168.3.4
       next
   end

2. Configure the web filter profile:

   config webfilter profile
       edit "webfilter_flowbase"
           set feature-set flow
           config ftgd-wf
               unset options
               config filters
                   edit 64
                       set category 64
                       set action block
                   next
               end
           end
           set wisp enable
           set wisp-servers "wisp1" "wisp2"
           set wisp-algorithm {primary-secondary | round-robin | auto-learning}
           set log-all-url enable
       next
   end