TACACS+ servers

TACACS+ is a remote authentication protocol that provides access control for routers, network access servers, and other network devices through one or more centralized servers.

FortiOS sends the following proprietary TACACS+ attributes to the TACACS+ server during authorization requests:

Attribute	Description
service=<name>	User must be authorized to access the specified service.
memberof	Group that the user belongs to.
admin_prof	Administrator profile (admin access only).

Only memberof and admin_prof attributes are parsed in authentication replies.

You can configure up to ten remote TACACS+ servers in FortiOS. You must configure at least one server before you can configure remote users.

A TACACS+ server must first be added in the CLI to make the option visible in the GUI.

To configure TACACS+ authentication in the CLI:

1. Configure the TACACS+ server entry:

   config user tacacs+
       edit "TACACS-SERVER"
           set server <IP address>
           set key <string>
           set authen-type ascii
           set source-ip <IP address>
       next
   end

2. Configure the remote user group:

   config user group
       edit "TACACS-GROUP"
           set group-type firewall
           set member "TACACS-SERVER"
       next
   end

3. Configure the remote user:

   config system admin
       edit TACACS-USER
           set remote-auth enable
           set accprofile "super_admin"
           set vdom "root"
           set wildcard enable
           set remote-group "TACACS-GROUP"
       next
   end

To configure a TACACS+ server in the GUI:

1. Go to User & Authentication > TACACS+ Servers.
2. Click Create New.
3. Configure the following settings:

   Name	Enter the TACACS+ server name.
   Authentication Type	Select the authentication type used for the TACACS+ server. Selecting Auto tries PAP, MSCHAP, and CHAP, in that order.
   Server IP/Name	Enter the domain name or IP address for the primary server.
   Server Secret	Enter the key to access the primary server.

4. Click OK.