system netflow
Configure NetFlow.
config system netflow
Description: Configure NetFlow.
set collector-ip {ipv4-address}
set collector-port {integer}
set source-ip {ipv4-address}
set active-flow-timeout {integer}
set inactive-flow-timeout {integer}
set template-tx-timeout {integer}
set template-tx-counter {integer}
end
config system netflow
| Parameter Name |
Description |
Type |
Size |
| collector-ip |
Collector IP. |
ipv4-address |
Not Specified |
| collector-port |
NetFlow collector port number. |
integer |
Minimum value: 0 Maximum value: 65535 |
| source-ip |
Source IP address for communication with the NetFlow agent. |
ipv4-address |
Not Specified |
| active-flow-timeout |
Timeout to report active flows (1 - 60 min, default = 30). |
integer |
Minimum value: 1 Maximum value: 60 |
| inactive-flow-timeout |
Timeout for periodic report of finished flows (10 - 600 sec, default = 15). |
integer |
Minimum value: 10 Maximum value: 600 |
| template-tx-timeout |
Timeout for periodic template flowset transmission (1 - 1440 min, default = 30). |
integer |
Minimum value: 1 Maximum value: 1440 |
| template-tx-counter |
Counter of flowset records before resending a template flowset record. |
integer |
Minimum value: 10 Maximum value: 6000 |
